Re: [Networker] Scanner question
2002-10-16 10:40:44
Sure, just use the full name of the device
rd=server:/dev/rmt/0cbn
rd=server:\\.\Tape0
Whichever corresponds to your storage node device
Bob
-----Original Message-----
From: roger midway [mailto:rogermidway AT YAHOO DOT COM]
Sent: 16 October 2002 15:36
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Scanner question
can you use scanner on a storage node? and what would
the syntax look like?
-RM
--- "Peacock, Tom" <TPeacock AT DETMA DOT ORG> wrote:
> Roger you should try this on another tape device or
> check your
> configiguration. I have seen this before and it
> turned out to be hardware
> related. Check the st.conf file or try another
> drive. Also try the scanner
> on a recent backup volume. You can scan/recover to
> similar OSes using the
> method you mention. You also didn't mention the type
> of data you are seeking
> to recover. You can scan/recover from UNIX to UNIX
> and UNIX to LINUX using
> this method. You cannot scan/recover from UNIX to
> Windows using your
> method. To relocate the recovered data use:
>
> scanner /dev/rmt/0cbn -x uasm -rv -m /=/someplace
>
> And don't forget the -i option to resolve any file
> conflicts.
>
>
> -----Original Message-----
> From: roger midway [mailto:rogermidway AT YAHOO DOT COM]
> Sent: Monday, October 14, 2002 2:25 PM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] scanner with uasm error
>
>
> I am receiving a write failed, Broken pipe error
> when
> scanning recovering using scanner.
>
> scanner -v /dev/rmt/0cbn -x uasm -rv
>
> These tapes are from a different solaris system
> decommissioned a couple of years ago.
>
> Hostname is different, but both hosts are UNIX.
>
> Any ideas on the error and is this OK to recover
> many
> different systems using scanner and uasm without
> building the databases?
>
> -RM
>
> __________________________________________________
> Do you Yahoo!?
> Faith Hill - Exclusive Performances, Videos & More
> http://faith.yahoo.com
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Networker] Scanner question,
Wood, R A (Bob) <=
|
|
|