Stefan

Reset option is not included from X11 interface.

You have 2 solutions : install the Windows GUI and 
admin your datazone from a windows system if you want to do
it graphicaly (autochanger reset is from operation control
panel you get after clicking on the right button on the lib
you want to manage) or use CLI (windows or unix) 
"nsrjb -HE" on the server or "nsrjb -HE -s server" if 
issued from a storage node controlling the robotic arm.

If you want to reset your lib properly, set back working
devices to ENABLE state and then issue the above nsrjb.

You can also add a "-v" flag to obtain more info about
what's being done.

Hope that helps,

Thierry
Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant

                             HEWLETT - PACKARD 
                             Compaq Computers, a member of the new HP
 *********       *********   1 Rue de l'aeronef/Luchtschipstraat
 *******    h      *******   1140 Bruxelles/Brussel/Brussels
 ******    h        ******  
 *****    hhhh  pppp *****   Hewlett-Packard Belgium
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 ***
CHANGED *** 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/

________________________________________________________________________
_____

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________
_____

  

-----Original Message-----
From: Stefan Kapitza [mailto:k AT PITZA DOT DE] 
Sent: Saturday, August 31, 2002 2:51 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] automounter reset not reflected in GUI


hi,

i had this issue i couple of times last weeks
(tape drives on my ESL9198 Library going dead)
As i can remember playing with the checkbox
array under devices (reflecting the state of the tapes ?)
helps me. I Think you must tick unload (from mounted).

Unfortunatly the rest of the procedure is off my fifo brain
queue.


hth.

s.kapitza

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=