Networker

Re: [Networker] Unable to configure autochanger - jukebox

2002-08-23 09:10:56
Subject: Re: [Networker] Unable to configure autochanger - jukebox
From: Matts Nilsson <matts_nilsson AT YAHOO DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Fri, 23 Aug 2002 15:13:43 +0200
 Hi!
First of all, disable the RSM, Removable Storage
Manager in Win2k. Second, try to find a driver for the
medium changer. That ought to get you started.

Good luck!

// Matts

 --- Dale Mayes <dmayes AT KIMBALL DOT COM> skrev: > Hello
all...a little help please...
>
> Trying to set this server up as a storage node to a
> HP-UX based NetWorker
> server running 6.1.2.
>
> Configuration:
>
> Compaq Proliant DL380
> Adaptec 29160 LVD Ultra-SCSI
> Win2K - SP3
>
> ATL L200 Powerstore
> LVD SCSI
> 8 slot autochanger
> (1) DLT-8000
>
> 6.1.2 storage node software installed on Compaq
> DL380
>
> Device manager list shows Adaptec card, medium
> changer (unknown type), and
> DLT-8000 drive.
> Using the registry editor I can see that the device
> address is [email protected]
> for the L200 and 2.1.0 for the DLT-8000.
>
> When I try sjiinq [email protected] I get:
>
> SJIINQ: Resource device
> Code: 0x29, Str=<Input/Output error>
>
> Until sjiinq works there's no way jbconfig will
> work...and yes I've tried
> jbconfig and it complains about the device driver.
>
> This is our first attempt to use the 64-bit LVD
> Adaptec card.
> We've had no issues with the 32-bit HVD Adaptec
> cards...but the servers
> we're now ordering only have 1 32-bit slot and it's
> needed for a remote
> management card.
>
> I've tried the default MS driver, the Adaptec driver
> on the DVD and even
> downloaded the latest driver from Adaptec's
> website...all with the same
> results.
>
> I'm trying to avoid the finger pointing exercise
> that will occur when I call
> Legato and/or Adaptec and/or Microsoft support.
>
> Any help...ideas...comments would be greatly
> appreciated.
> Thanks in advance!
>
> Dale
>
>
> --
> Note: To sign off this list, send a "signoff"
> command via email
> to listserv AT listmail.temple DOT edu or visit the list's
> Web site at
> http://listmail.temple.edu/archives/networker.html
> where you can
> also view and post messages to the list.
>
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

_____________________________________________________
Gratis e-mail resten av livet på www.yahoo.se/mail
Busenkelt!

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>