Thanks all,

It works great!

Alex Li
----- Original Message -----
From: "Terry Lemons" <lemons_terry AT EMC DOT COM>
To: <NETWORKER AT LISTMAIL.TEMPLE DOT EDU>
Sent: Thursday, August 22, 2002 11:53 PM
Subject: Re: [Networker] Library Sharing


> Hi Alex
>
> You should jbconfig on the NetWorker server only, and (assuming you have
> standard SCSI or FC libraries connected to a FC SAN) select the
'autodetect
> SCSI' option.
>
> Good luck!
> tl
>
> -----Original Message-----
> From: Alex T. H. Li [mailto:alexlihk AT HOTMAIL DOT COM]
> Sent: Wednesday, August 21, 2002 11:50 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Library Sharing
>
>
> Dear All,
>
> I am now trying the library Sharing with 2 Solaris and 1 M1500 (20 slots
and
> 2 LTO LVD SCSI).
>
> when i run jbconfig, which one should I select? Smartdrv or autodetect
scsi
> device?
>
> When I run jbconfig in the SAN Storage Node server, what should I need to
be
> careful?
>
> thanks.
>
> Alex Li
> Certified Unicenter Engineer,
> Sun Certified Backup and Recovery Engineer
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=