[Networker] difference between volume window and mminfo output.
2002-08-22 05:35:08
Could you help me on this problem
I have a customer with SBU 6.1.2 on solaris 8. When he opens the Media/Volumes
window in nwadmin he has the following print-out
Volumes Barcode Pool Written %Used Mode Expiration Location
backup.0002 C0004G Default 102 GB 100% Appen - L20-1
backup.0003 DL3227 Default 96 GB 100% Appen -
backup.0005 DL3229 Default 98 GB full recyc expired
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
clone.0005 C0004G Default Clone 97 GB full manual L20-1
In fact the same tape appears 2 time in this report, with 2 different names.
Here is the result of the "mminfo -q 'barcode=C0004G'" command.
volume client date size level name
clone.0019 tklfinxs7-bck 06/21/02 1162 MB full /
clone.0019 tklfinxs9-bck 06/21/02 327 MB full /
clone.0019 tklmdf6-bck 06/21/02 113 MB full /
clone.0019 tklmdf8-bck 06/21/02 338 MB full /
clone.0019 tklbcks1 06/21/02 85 MB full index:tklfinxs8-bck
clone.0019 tklbcks1 06/21/02 82 MB full index:tklfinxs7-bck
. . . . . .
. . . . . .
. . . . . .
and this the report from a script which gives the content of the robot :
#############
ROBOT CONTENT
#############
State Volume Barcode Pool used %used Nb re-label
===============================================================================
backup.0019 B0004F Default 93 GB full 2
backup.0020 B0005G Default 104 GB full 1
backup.0024 B0008J Default 0 KB 0% 1
E backup.0006 DL3238 Default 101 GB full 0
E backup.0011 DL3243 Default 98 GB full 0
E backup.0012 DL3244 Default 105 GB full 0
E backup.0015 DL3246 Default 92 GB full 0
E backup.0016 B0001C Default 105 GB full 0
M backup.0021 B0006H Default 56 GB 100% 1
M backup.0023 B0007I Default 71 GB 100% 1
M clone.0015 C0001D Default Clone 99 GB full 0
M clone.0016 C0002E Default Clone 96 GB full 0
M clone.0017 C0003F Default Clone 98 GB full 0
M clone.0019 C0004G Default Clone 97 GB full 1
M clone.0020 C0006I Default Clone 98 GB full 1
M clone.0021 C0007J Default Clone 102 GB full 1
M clone.0022 C0008K Default Clone 93 GB 100% 1
M clone.0023 C0009L Default Clone 0 KB 0% 1
===============================================================================
State: M: manually recyc, E: eligible for recyc, X: both
NUMBER OF UNUSED/NON-LABELED TAPES IN ROBOT: 0
NUMBER OF TAPES AVAILABLE FOR BACKUP: 3 ( 1 totally free)
NUMBER OF TAPES AVAILABLE FOR CLONING: 2 ( 1 totally free)
Do you think I have a corrupted media database ?
Where SBU stores the content of the volume window, or which command is used ?
I would delete the 'bad media' in the volume window, do you think it's a good
idea ?
thanks for your help.
olivier
_/_/_/ _/ _/ _/ _/ Olivier Mista
_/ _/ _/ _/_/ _/ system support Engineer
_/_/_/ _/ _/ _/ _/ _/ Support services Luxembourg
_/ _/ _/ _/ _/_/ olivier.mista AT luxembourg.sun DOT com
_/_/_/ _/_/_/ _/ _/
M I C R O S Y S T E M S
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] difference between volume window and mminfo output.,
Olivier Mista - Sun Luxembourg - Systems Support Engineer <=
|
|
|