Networker

Re: [Networker] Need help in DDS

2002-08-16 01:55:17
Subject: Re: [Networker] Need help in DDS
From: Lee Hwan Meng <hwanlee AT SOFTHOME DOT NET>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Fri, 16 Aug 2002 01:57:51 -0400
In any case, in a SAN environment, you cannot have 2 backup servers, even
though they may be talking to different storage volume.

Anyway, one solution given to me was to adjust the startup script
(/etc/init.d/networker) so that backup server daemon nsrd is not started on
the storage node when used as client. Of course, when used as backup server
to the old library, stop nsr and uncomment off nsrd in the startup script
again.



On Thu, 8 Aug 2002 07:19:46 -0500, Rohrich, James <rohrich AT UOP DOT COM> 
wrote:

>Assuming you have a license, you also have to load the storage node
software
>on Server B. This might mean unloading the backup server software on the
>Server B first and then load the storage node software. Becareful if server
>B was running as a backup server since you might lose data. A storage node
>does not save indexes since they are only kept on the backup server. Make
>sure you are doing what you want.
>
>-----Original Message-----
>From: Lee Hwan Meng
>To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
>Sent: 8/8/02 5:31 AM
>Subject: [Networker] Need help in DDS
>
>Hi
>
>Our environment:
>
>Server A (Networker backup server)
>Server B (Storage nodes)
>Using SAN, DDS enabled for both sharing 6 drives on tape library
>
>When Server B is configured also as Networker backup server, I got this
>error messages:
>
>Aug  8 10:18:19 A root: [ID 702911 daemon.notice] NetWorker media:
>(notice)
>check storage node: B (a server cannot be a storage node)
>
>The point is, I have some data backed up in a smaller library before the
>arrival of this 6-drive monster, in order to retrieve the data, I need
>to
>attached Server B to the smaller library, so Server B also needs to be a
>backup server. How can I achieve that? Is it possible to do it?
>
>Thanks.
>
>Regards
>Hwan Meng
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=