On Mon, 12 Aug 2002 18:08:26 +0300, Emre PEKAR <emre.pekar AT DATA-TEK.COM DOT 
TR>
wrote:

>I have 3 W2K systems all connected to a Sun StorEdge3500 (3XDLT7000) with
>a Modular Data Router.  One of the W2K systems is the backuo server and the
>other
>two are storage nodes.  They all run 6.1.1.  The problems is I am getting
>some DLT tapes
>FULL at 4GBs.  This problems goes away for a certain time being if I
>re-install&configure
>networker

Why would you choose to do that? Seems like a sledgehammer approach.

There are lots of reasons why your tapes could be marked full prematurely.
In a pure SCSI environment it would be because of problems with
drives/tapes/cabling/terminators etc. You have an MDR so you have a SAN.
You have given us very little to go on, in terms of what your config is.
SAN introduces many more failure modes, such as bus resets, conflicts with
other devices or servers etc. You need to do a bit of work to find out what
the OS thinks is wrong. Check daemon.log and the event logger in W2K to see
whether there are device or controller errors. Then help us to help you by
telling us about your environment.

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=