Re: [Networker] AW: [Networker] restoring from cloned save sets

Seems my reply get lost somewhere ...

Recovering from CLI using recover command, use -S ssid[/cloneid]
to recover from clone tape.

Use mminfo before with -r name,ssid,cloneid to get the cloneid of the
SS you want to recover from the clone tape and then launch the 
recover from CLI.

That should work without marking original tape suspect.

Hope that helps and sorry for delay.

Thierry

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant

                             HEWLETT - PACKARD 
                             Compaq Computers, a member of the new HP
 *********       *********   1 Rue de l'aeronef/Luchtschipstraat
 *******    h      *******   1140 Bruxelles/Brussel/Brussels
 ******    h        ******  
 *****    hhhh  pppp *****   Hewlett-Packard Belgium
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32(0)2/729.85.42   
                             Mobile :   +32(0)478/50.51.36 
                             Fax :      +32(0)2/729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/

_____________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2/745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2/745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
_____________________________________________________________________________



-----Original Message-----
From: Hohentanner, Sebastian [mailto:Sebastian.Hohentanner AT OPS DOT DE] 
Sent: Wednesday, August 07, 2002 8:51 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] AW: [Networker] restoring from cloned save sets


That's normal as long as you didn't mark the original saveset as "suspect"!
Sebastian

-----Ursprüngliche Nachricht-----
Von: Alan Rubin [mailto:Alan.Rubin AT NRE.VIC.GOV DOT AU]
Gesendet: Mittwoch, 7. August 2002 03:04
An: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Betreff: [Networker] restoring from cloned save sets


I made some clones of previous save sets yesterday, and that process seemed
to
work correctly.  However, I am now trying to restore from the clones as a
test,
and while the system initially accepted my clone volume as the proper volume
for
the requested data, it is now asking for the orginal.  This is with Solstice
Backup 6.1.1 on Solaris.  Any suggestions?  The clone tapes are on-line, and
the
originals have been physically removed from the library.

Thanks,

Alan

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=