I'm a complete newbie at Bacula but I have had good luck using
telnet to verify connectivity.
From the bacula server you should be able to:
ping both directions - client to server, server to client.
Try connecting to the TCP ports with telnet
telnet client.ip.name.or.address 9102
and you should connect. Hit enter a couple of times and it will
disconnect - that's normal.
Same from the client back toward the storage server on 9103
On either machine
netstat -a | grep bacula
should show you the open ports.
Mark
On 6/19/17 9:36 PM, Thing wrote:
Hi,
I have set up a bacula server on Debian8. Ive connected and
backup a remote client fine but when I try to do a second I
get a failure to connect (both Debian8).
How can I fault find on the connection as I can find no info to
tell me why its failing?
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
