Bacula-users

Re: [Bacula-users] Bacula Windows Storage Daemon Achive & Tape Device Paths

2017-06-03 09:52:57
Subject: Re: [Bacula-users] Bacula Windows Storage Daemon Achive & Tape Device Paths
From: Kern Sibbald <kern AT sibbald DOT com>
To: Heitor Faria <heitor AT bacula.com DOT br>, bacula-users <bacula-users AT lists.sourceforge DOT net>
Date: Sat, 3 Jun 2017 15:51:46 +0200

The current Bacula Windows Storage daemon does not support tape drives.  We explicitly turned it off because it seems to be unreliable.


On 06/03/2017 02:40 PM, Heitor Faria wrote:
Hello, Bacula Users,

I could not find any information in the manuals about this.
When trying to update slots of a virtual (mhvtl) iSCSI tape library attached to Windows 2012 Server (also tried 2008), I receive this message:

===============================================================
Connecting to Storage daemon Windows at 192.168.0.35:9103 ...

Device "Drive-1" in changer "Autochanger" requested by DIR could not be opened or does not exist.

Device "Drive-2" in changer "Autochanger" requested by DIR could not be opened or does not exist.
3999 Device "Autochanger" not found or could not be opened.
===============================================================

I've tried different archive values for the Changer: Changer0, Changer, SCSI/Changer, with the same result.
Bellow is the device configuration:

=======================
# windows-sd.conf

Autochanger {
Name = Autochanger
Device = Drive-1
Device = Drive-2
Changer Command = "mtx-changer %c %o %S %a %d"
Changer Device = Changer0
}

Device {
Name = Drive-1 #
Drive Index = 0
Media Type = LTO
Device Type = Tape
Archive Device = "Tape0"
AutomaticMount = yes # when device opened, read
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = yes
Alert Command = "tapeinfo -f %c | findstr TapeAlert"
}

Device {
Name = Drive-2 #
Drive Index = 1
Media Type = LTO
Device Type = Tape
Archive Device = "Tape1"
AutomaticMount = yes # when device opened, read it
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = yes
Alert Command = "tapeinfo -f %c | findstr TapeAlert"
}

Regards,
--
===========================================================================
Heitor Medrado de Faria  | Bacula do Brasil
• Não seja tarifado pelo tamanho dos seus backups, conheça o Bacula Enterprise: http://www.bacula.com.br/enterprise/
 Ministro treinamento e implementação in-company do Bacula Community: http://www.bacula.com.br/in-company/
(61) 98268-4220 | www.bacula.com.br 
============================================================================
Indicamos também as capacitações complementares:
 Shell básico e Programação em Shell com Julio Neves.
 Zabbix com Adail Host.
============================================================================


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot


_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>

ADSM.ORG Privacy and Data Security by https://kimlaw.us