Thanks Ralf. How many drives do you have in your new tape library?
Can you share your bacula-fd.conf file?
Old and new tape library do have a single drive.
At the moment all the bacula-fd.conf are looking like the following - all backup jobs per host are running parallel.
I will remove the director for "host-old" in the near future. At the moment some very few jobs on host-old are still running.
Director {
Name = host-old-dir
Password = "1234"
}
Director {
Name = host-new-dir
Password = "1234"
}
Director {
Name = host-old-mon
Password = "1234"
Monitor = yes
}
FileDaemon { # this is me
Name = server-xy-fd # File-Daemon on Server "server-xy"
FDport = 9102 # where we listen for the director
WorkingDirectory = /var/lib/bacula/working
Pid Directory = /var/run
Maximum Concurrent Jobs = 20
}
Messages {
Name = Standard
director = host-new-dir = all, !skipped, !restored
}
--
Ralf Brinkmann
Thanks Ralf. I made a typo. I actually wanted to see your bacula-sd.conf file.
Anyway, my library has TWO LTO6 drives and I have to define both drives explicitly. Else the autochanger gets mightily confused which drive to use.
Following is my "flawlessly working for the past 9 years" configuration for the IBM TS3200 tape library.
######## START ######################
Autochanger {
Name = TS3200_2_DRV1
Device = LTO6_1 # If you need to add more use comma separation
Changer Device = /dev/sg3 # This is mapped to the AutoLoader