I have to check with IA regarding opening up the firewall to allow the port
number to pass through.  He's been on leave and returned yesterday.  I did
not have a chance to talk to him.  I will today.

Michael Vasquez (Mike)
Security+
System Administrator/Software Engineer
619-532-5797 (W)
619-278-8725 (C)

-----Original Message-----
From: bacula-users-request AT lists.sourceforge DOT net
[mailto:bacula-users-request AT lists.sourceforge DOT net] 
Sent: Wednesday, December 03, 2014 7:35 AM
To: bacula-users AT lists.sourceforge DOT net
Subject: Bacula-users Digest, Vol 104, Issue 3

Send Bacula-users mailing list submissions to
        bacula-users AT lists.sourceforge DOT net

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.sourceforge.net/lists/listinfo/bacula-users
or, via email, send a message with subject or body 'help' to
        bacula-users-request AT lists.sourceforge DOT net

You can reach the person managing the list at
        bacula-users-owner AT lists.sourceforge DOT net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Bacula-users digest..."


Today's Topics:

   1. Re: Problems with Quantum SuperLoader 3 LTO-6 (Roberts, Ben)
   2. Re: Problems with Quantum SuperLoader 3 LTO-6 (Heitor Faria)
   3. Re: Problems with Quantum SuperLoader 3 LTO-6
      (Ana Em?lia M. Arruda)
   4. current recommendations for SSD spool disk with   LTO/Ultrium?
      (Daniel Pocock)
   5. Re: bacula can't make use of multi drives (S?leyman Kuran)
   6. Re: current recommendations for SSD spool disk with
      LTO/Ultrium? (Josh Fisher)
   7. Re: Problems with Quantum SuperLoader 3 LTO-6 (Rainer Hackel)


----------------------------------------------------------------------

Message: 1
Date: Wed, 3 Dec 2014 11:34:19 +0000
From: "Roberts, Ben" <ben.roberts AT gsacapital DOT com>
Subject: Re: [Bacula-users] Problems with Quantum SuperLoader 3 LTO-6
To: Rainer Hackel <rainer.hackel AT degnerpartner DOT com>,
        "bacula-users AT lists.sourceforge DOT net"
        <bacula-users AT lists.sourceforge DOT net>
Message-ID:
        
<AMSPR04MB519ECFD7DCF3F1FC9E1382D8A7B0 AT AMSPR04MB519.eurprd04.prod.outlook 
DOT co
m>
        
Content-Type: text/plain; charset="utf-8"

Hi Rainer,

> First problem:
> Starting Bacula this way doesn't work anymore:
> cd /etc/init.d
> ./bacula-dir start

You're going to have to do some good old fashioned debug to work this out.
Check the logs, try running the exact commands the init script executes
(make sure to do it as the same user the director runs under to eliminate
any permissions issue). You've proved that the director can started, now you
need to isolate how it's being started differently by the init script.

> All works fine, shows amount of slots and also the labels of stored tapes.
Mtx-changer parses this output using a regular expression. You may wish to
make sure the data is being returned in the same format, and tweak the
pattern match if it's different. Look for "VolumeTag" in the mtx-changer
script.

Regards,
Ben Roberts

This email and any files transmitted with it contain confidential and
proprietary information and is solely for the use of the intended recipient.
If you are not the intended recipient please return the email to the sender
and delete it from your computer and you must not use, disclose, distribute,
copy, print or rely on this email or its contents.
This communication is for informational purposes only.
It is not intended as an offer or solicitation for the purchase or sale of
any financial instrument or as an official confirmation of any transaction.
Any comments or statements made herein do not necessarily reflect those of
GSA Capital.
GSA Capital Partners LLP is authorised and regulated by the Financial
Conduct Authority and is registered in England and Wales at Stratton House,
5 Stratton Street, London W1J 8LA, number OC309261.
GSA Capital Services Limited is registered in England and Wales at the same
address, number 5320529.

-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 2
Date: Wed, 3 Dec 2014 08:45:06 -0300 (BRT)
From: Heitor Faria <heitor AT bacula.com DOT br>
Subject: Re: [Bacula-users] Problems with Quantum SuperLoader 3 LTO-6
To: Rainer Hackel <rainer.hackel AT degnerpartner DOT com>
Cc: bacula-users AT lists.sourceforge DOT net
Message-ID:
        
<assp.04149ea31b.869210681.61153223.1417607106677.JavaMail.zimbra AT bacula DOT 
com
.br>
        
Content-Type: text/plain; charset="utf-8"

> Hello Bacula users,

> we run bacula backup for a while now. We had to replace our Tandberg
> Tape-Library (StorageLoader LTO-5) by a Quantum device (Superloader LTO-6)
> and have some problems now. Maybe someone can help.

> Next problem:

> bconsole

> update slots

> Result:

> ?

> 3306 Issuing autochanger "slots" command.

> Device "Autochanger" has 0 slots.

> No slots in changer to scan.

> But:

> /usr/libexec/bacula/mtx-changer /dev/sg1 list 0 /dev/nst0 0

> Or

> /usr/libexec/bacula/mtx-changer /dev/sg1 slots

> Or

> /usr/libexec/bacula/mtx-changer /dev/sg1 load 3 /dev/nst0 0

> All works fine, shows amount of slots and also the labels of stored tapes.

> Entry in bacula-sd.conf:

> Autochanger {

> Name = Autochanger

> Device = LTO-5

> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"

> Changer Device = /dev/changer

> }

> Rights on /dev:

> lrwxrwxrwx. 1 root root 3 Dec 2 09:38 changer -> sg1

> crwxrwxrwx. 1 root tape 21, 1 Dec 2 09:38 sg1

Mr. Rainer: can you enable the mtx-changer script logging? (
/usr/libexec/bacula/ mtx-changer.conf, debug_log=1). 
Then post the output of mtx.log. 

Regards, 
============================================================================
== 
Heitor Medrado de Faria - LPIC-III | ITIL-F 
12 a 23 de janeiro de 2015 - Treinamento Telepresencial Bacula:
http://www.bacula.com.br/?p=2174 
61 2021-8260 | 8268-4220 
Site: www.bacula.com.br | Facebook: heitor.faria | Gtalk:
heitorfaria AT gmail DOT com 
============================================================================
=== 
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 3
Date: Wed, 3 Dec 2014 09:12:02 -0300
From: Ana Em?lia M. Arruda <emiliaarruda AT gmail DOT com>
Subject: Re: [Bacula-users] Problems with Quantum SuperLoader 3 LTO-6
To: Rainer Hackel <rainer.hackel AT degnerpartner DOT com>
Cc: "bacula-users AT lists.sourceforge DOT net"
        <bacula-users AT lists.sourceforge DOT net>
Message-ID:
        <CAAh-UZYKNhRdit1vs7hwws6Fqc-GeFgdEGxSGfYhhxz0Tw_DgQ AT mail.gmail DOT 
com>
Content-Type: text/plain; charset="utf-8"

Hello Rainer,

Could you tell us which version are you using? Have you upgraded?

Could you post the results of the "/usr/libexec/bacula/mtx-changer /dev/sg1
listall" command?

Best regards,
Ana

On Wed, Dec 3, 2014 at 7:45 AM, Rainer Hackel <
rainer.hackel AT degnerpartner DOT com> wrote:

>  Hello Bacula users,
>
> we run bacula backup for a while now. We had to replace our Tandberg
> Tape-Library (StorageLoader LTO-5) by a Quantum device (Superloader LTO-6)
> and have some problems now. Maybe someone can help.
>
>
>
> First problem:
>
> Starting Bacula this way doesn?t work anymore:
>
> cd /etc/init.d
>
> ./bacula-dir start
>
>
>
> Starting this way works fine:
>
> cd /etc/init.d
>
> bacula-dir /etc/bacula/bacula-dir.conf
>
>
>
> I could live with that, but I wonder why this happened?
>
>
>
>
>
> Next problem:
>
> bconsole
>
> update slots
>
> Result:
>
> ?
>
> 3306 Issuing autochanger "slots" command.
>
> Device "Autochanger" has 0 slots.
>
> No slots in changer to scan.
>
>
>
> But:
>
> /usr/libexec/bacula/mtx-changer /dev/sg1 list 0 /dev/nst0 0
>
> Or
>
> /usr/libexec/bacula/mtx-changer /dev/sg1 slots
>
> Or
>
> /usr/libexec/bacula/mtx-changer /dev/sg1 load 3 /dev/nst0 0
>
> All works fine, shows amount of slots and also the labels of stored tapes.
>
>
>
>
>
> Entry in bacula-sd.conf:
>
> Autochanger {
>
>   Name = Autochanger
>
>   Device = LTO-5
>
>   Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>
>   Changer Device = /dev/changer
>
> }
>
>
>
>
>
> Rights on /dev:
>
> lrwxrwxrwx. 1 root root 3 Dec  2 09:38 changer -> sg1
>
> crwxrwxrwx. 1 root tape 21, 1 Dec  2 09:38 sg1
>
>
>
> It would be great if someone could help.
>
> Rainer
>
>
>
----------------------------------------------------------------------------
--
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
>
http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 4
Date: Wed, 03 Dec 2014 14:12:53 +0100
From: Daniel Pocock <daniel AT pocock DOT pro>
Subject: [Bacula-users] current recommendations for SSD spool disk
        with    LTO/Ultrium?
To: bacula-users AT lists.sourceforge DOT net
Message-ID: <547F0C55.5000204 AT pocock DOT pro>
Content-Type: text/plain; charset=ISO-8859-1


Can anybody make any practical comments on how to choose a suitable
spool disk (both speed, size and whether to make an array of disks for
spooling)?

It would be useful to see some examples of spooling for LTO-3 up to
LTO-6 and also any comments about things to avoid

For example, if somebody uses LTO-3 (400GB, supporting 60 - 80MB/sec)
will a single SSD sustain the necessary speed de-spooling to tape or
should multiple SSDs be used in RAID0 or RAID1?  Is it feasible for
clients to be spooling more jobs to the same disk simultaneously while
the tape drive is reading from it?




------------------------------

Message: 5
Date: Wed, 3 Dec 2014 15:37:52 +0200 (EET)
From: S?leyman Kuran <skuran AT ayk.gov DOT tr>
Subject: Re: [Bacula-users] bacula can't make use of multi drives
To: Ana Em?lia M. Arruda <emiliaarruda AT gmail DOT com>
Cc: bacula-users <bacula-users AT lists.sourceforge DOT net>
Message-ID: <1518375286.3917.1417613872329.JavaMail.zimbra AT ayk.gov DOT tr>
Content-Type: text/plain; charset="utf-8"

At last !!! 

Finally setting same priority for the jobs "did the job". Now bacula can
write to all 4 drives for the jobs that are in the same pool simultaneously.


Thanks for the support. 


----- Original Message -----

From: "Ana Em?lia M. Arruda" <emiliaarruda AT gmail DOT com> 
To: "S?leyman Kuran" <skuran AT ayk.gov DOT tr> 
Cc: "bacula-users" <bacula-users AT lists.sourceforge DOT net> 
Sent: Tuesday, 18 November, 2014 6:20:24 PM 
Subject: Re: [Bacula-users] bacula can't make use of multi drives 

Hello! 

If you want to run concurrent jobs, you should define the same priority for
all of them. From the manual: "Bacula concurrently runs jobs of only one
priority at a time. It will not simultaneously run a priority 1 and a
priority 2 job." 

Best regards, 
Ana 

On Tue, Nov 18, 2014 at 6:39 AM, S?leyman Kuran < skuran AT ayk.gov DOT tr > 
wrote:




Hi, 

I am trying to make bacula use multi drives in a Fujitsu Tape Library with
no success. Recently I added 3 more drives to bacula configuration to reduce
backup time. But bacula insists on using only the first drive. Backup jobs
are not sent to other suitable tape drives. Jobs are started at the same
time and queued. Jobs in the queue is waiting for the previous job to finish
even if there is a valid media (tape) for the pool and other drives are
idle. I can mount other drives manually. Is there any other setting I'm
missing to make use of multi-drives? Please advise. 

Regards, 

Suleyman 

============================================================================
====== 
CentOS release 6.5 (Final) 
Bacula version 5.0.0-12.el6 

C onfig files: 

bacula-sd.conf 
============================================================================
====== 
Storage { # definition of myself 
Name = bacula-sd 
SDPort = 9103 # Director's port 
WorkingDirectory = "/var/spool/bacula" 
Pid Directory = "/var/run" 
Maximum Concurrent Jobs = 2 
} 
.... 
Autochanger { 
Name = AYKAutochanger 
Device = Drive-1 
Device = Drive-2 
Device = Drive-3 
Device = Drive-4 
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" 
Changer Device = /dev/sg9 
} 
Device { 
Name = Drive-1 
Drive Index = 0 
Media Type = LTO-5 
Archive Device = /dev/nst0 
AutomaticMount = yes 
AlwaysOpen = yes 
RemovableMedia = yes 
Random Access = no 
Maximum File Size = 10GB 
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" 
Changer Device = /dev/sg9 
AutoChanger = yes 
} 
Device { 
Name = Drive-2 
Drive Index = 1 
Media Type = LTO-5 
Archive Device = /dev/nst1 
AutomaticMount = yes 
AlwaysOpen = yes 
RemovableMedia = yes 
Random Access = no 
Maximum File Size = 10GB 
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" 
Changer Device = /dev/sg9 
AutoChanger = yes 
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" 
} 
Device { 
Name = Drive-3 
Drive Index = 2 
Media Type = LTO-5 
Archive Device = /dev/nst2 
AutomaticMount = yes 
AlwaysOpen = yes 
RemovableMedia = yes 
Random Access = no 
Maximum File Size = 10GB 
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" 
# Changer Device = /dev/changer 
Changer Device = /dev/sg9 
AutoChanger = yes 
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" 
} 
Device { 
Name = Drive-4 
Drive Index = 3 
Media Type = LTO-5 
Archive Device = /dev/nst3 
AutomaticMount = yes 
AlwaysOpen = yes 
RemovableMedia = yes 
Random Access = no 
Maximum File Size = 10GB 
Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d" 
Changer Device = /dev/sg9 
AutoChanger = yes 
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" 
} 
... 
=========================================================================== 
ba cula-dir.conf 

Director { # define myself 
Name = bacula-dir 
DIRport = 9101 # where we listen for UA connections 
QueryFile = "/etc/bacula/query.sql" 
WorkingDirectory = "/var/spool/bacula" 
PidDirectory = "/var/run" 
Maximum Concurrent Jobs = 2 
Password = "mypassword" # Console password 
Messages = Daemon 
} 
JobDefs { 
Name = "MyJobDefs" 
Type = Backup 
Storage = "Fujitsu ETERNUS LT60" 
Max Start Delay = 36000 #do not start jobs after 10 hours 
Messages = Standard 
Pool = Default # will be overwritten by MultipleRUN Schedule 
#Write Bootstrap = "/var/spool/bacula/%c.bsr" 
Prefer Mounted Volumes = no 
} 
Job { 
Name = "EbysFileBackup" 
JobDefs = "MyJobDefs" 
Client = bacula-fd 
FileSet="EbysFiles" 
Schedule = "MultipleRUN" 
Priority = 10 
} 
Job { 
Name = "LoggerBackup" 
JobDefs = "MyJobDefs" 
Client = logger-fd 
FileSet="Logger" 
Schedule = "MultipleRUN" 
Priority = 15 
} 
Job { 
Name = "RadiusBackup" 
JobDefs = "MyJobDefs" 
Client = radius-fd 
FileSet="RadiusFiles" 
Schedule = "MultipleRUN" 
Priority = 20 
} 
Schedule { 
Name = "MultipleRUN" 
Run = Level=Full Pool=Daily mon-thu at 2:17 
Run = Level=Full Pool=Daily 2nd-5th fri at 2:17 
Run = Level=Full Pool=Daily 2nd-5th sat at 2:17 
#never run Daily on 1st 
Run = Level=Full Pool=Weekly sun at 2:17 
#Run = Level=Incremental Pool=Weekly mon-sat at 19:05 
Run = Level=Full Pool=Monthly 1st sat at 2:17 
#Run = Level=Incremental Pool=Monthly sun-fri at 2:05 
Run = Level=Full Pool=Offsite 1st fri at 2:17 
} 
Client { 
Name = radius-fd 
Address = client-address 
FDPort = 9102 
Catalog = MyCatalog 
Password = "mypassword" # password for FileDaemon 2 
} 
Storage { 
Name = "Fujitsu ETERNUS LT60" 
Address = sd-FQDN-address # N.B. Use a fully qualified name here 
SDPort = 9103 
Password = "mypassword" # password for Storage daemon 
Device = AYKAutochanger 
Media Type = LTO-5 # must be same as MediaType in Storage daemon 
Autochanger = yes # enable for autochanger device 
Maximum Concurrent Jobs = 2 
} 
Pool { 
Name = Daily 
Pool Type = Backup 
Recycle = yes # Bacula can automatically recycle Volumes 
AutoPrune = yes # Prune expired volumes 
Volume Retention = 7 days 
Cleaning Prefix = "CLN" 
Maximum Volume Bytes = 4924983103488 
} 
Pool { 
Name = Weekly 
Pool Type = Backup 
Recycle = yes # Bacula can automatically recycle Volumes 
AutoPrune = yes # Prune expired volumes 
Volume Retention = 30 days 
Cleaning Prefix = "CLN" 
Maximum Volume Bytes = 4924983103488 
} 

#file set definitions and some unrelated config snipped 
============================================================ 
bacula-fd.conf 

FileDaemon { # this is me 
Name = bacula-fd 
FDport = 9102 # where we listen for the director 
WorkingDirectory = /var/spool/bacula 
Pid Directory = /var/run 
Maximum Concurrent Jobs = 2 
} 
.... 
snipped 

========================================================= 






----------------------------------------------------------------------------
-- 
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server 
from Actuate! Instantly Supercharge Your Business Reports and Dashboards 
with Interactivity, Sharing, Native Excel Exports, App Integration & more 
Get technology previously reserved for billion-dollar corporations, FREE 
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk

_______________________________________________ 
Bacula-users mailing list 
Bacula-users AT lists.sourceforge DOT net 
https://lists.sourceforge.net/lists/listinfo/bacula-users 






-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

Message: 6
Date: Wed, 03 Dec 2014 09:23:36 -0500
From: Josh Fisher <jfisher AT pvct DOT com>
Subject: Re: [Bacula-users] current recommendations for SSD spool disk
        with LTO/Ultrium?
To: bacula-users AT lists.sourceforge DOT net
Message-ID: <547F1CE8.5010406 AT pvct DOT com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

On 12/3/2014 8:12 AM, Daniel Pocock wrote:
> Can anybody make any practical comments on how to choose a suitable
> spool disk (both speed, size and whether to make an array of disks for
> spooling)?
>
> It would be useful to see some examples of spooling for LTO-3 up to
> LTO-6 and also any comments about things to avoid
>
> For example, if somebody uses LTO-3 (400GB, supporting 60 - 80MB/sec)
> will a single SSD sustain the necessary speed de-spooling to tape or
> should multiple SSDs be used in RAID0 or RAID1?  Is it feasible for
> clients to be spooling more jobs to the same disk simultaneously while
> the tape drive is reading from it?

A single SSD such as the Intel Fultondale series will sustain average 
read speeds far in excess of the LTO-6 400 MB/s maximum. A Lyndonville 
series will sustain average read speeds of around 200 MB/s. But you have 
to compare apples to apples. The maximum write speed of LTO-6 is 400 
MB/s, but what is the average write speed after writing many blocks for 
a whole job? A single Lyndonville drive may suffice, or a RAID array of 
SAS drives. I stay away from RAIDing SSDs and won't use RAID0 for anything.

Also, in addition to de-spooling data to tape, it must also de-spool 
metadata to the database. IMO, the SSD makes far more difference for the 
database than for the spool.




------------------------------

Message: 7
Date: Wed, 3 Dec 2014 15:34:20 +0000
From: Rainer Hackel <rainer.hackel AT degnerpartner DOT com>
Subject: Re: [Bacula-users] Problems with Quantum SuperLoader 3 LTO-6
To: Heitor Faria <heitor AT bacula.com DOT br>
Cc: "bacula-users AT lists.sourceforge DOT net"
        <bacula-users AT lists.sourceforge DOT net>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"

Hello Heitor,
here the log produced by the ?update slots? command (just 2 lines):
20141203-16:05:07 Parms: /dev/changer slots 0 /dev/nst0 0
20141203-16:05:07 Doing mtx -f /dev/changer -- to get count of slots

Rainer

Von: Heitor Faria [mailto:heitor AT bacula.com DOT br]
Gesendet: Mittwoch, 3. Dezember 2014 12:45
An: Rainer Hackel
Cc: bacula-users AT lists.sourceforge DOT net
Betreff: Re: [Bacula-users] Problems with Quantum SuperLoader 3 LTO-6

Hello Bacula users,
we run bacula backup for a while now. We had to replace our Tandberg
Tape-Library (StorageLoader LTO-5) by a Quantum device (Superloader LTO-6)
and have some problems now. Maybe someone can help.

Next problem:
bconsole
update slots
Result:
?
3306 Issuing autochanger "slots" command.
Device "Autochanger" has 0 slots.
No slots in changer to scan.

But:
/usr/libexec/bacula/mtx-changer /dev/sg1 list 0 /dev/nst0 0
Or
/usr/libexec/bacula/mtx-changer /dev/sg1 slots
Or
/usr/libexec/bacula/mtx-changer /dev/sg1 load 3 /dev/nst0 0
All works fine, shows amount of slots and also the labels of stored tapes.


Entry in bacula-sd.conf:
Autochanger {
  Name = Autochanger
  Device = LTO-5
  Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
  Changer Device = /dev/changer
}


Rights on /dev:
lrwxrwxrwx. 1 root root 3 Dec  2 09:38 changer -> sg1
crwxrwxrwx. 1 root tape 21, 1 Dec  2 09:38 sg1
Mr. Rainer: can you enable the mtx-changer script logging?
(/usr/libexec/bacula/mtx-changer.conf, debug_log=1).
Then post the output of mtx.log.

Regards,
============================================================================
==
Heitor Medrado de Faria  - LPIC-III | ITIL-F
12 a 23 de janeiro de 2015 - Treinamento Telepresencial Bacula:
http://www.bacula.com.br/?p=2174
61 2021-8260<tel:%2B55%2061%202021-8260> |
8268-4220<tel:%2B55%2061%208268-4220>
Site: www.bacula.com.br<http://www.bacula.com.br/> | Facebook:
heitor.faria<http://www.facebook.com/heitor.faria> | Gtalk:
heitorfaria AT gmail DOT com<mailto:heitorfaria AT gmail DOT com>
============================================================================
===

-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------

----------------------------------------------------------------------------
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk

------------------------------

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users


End of Bacula-users Digest, Vol 104, Issue 3
********************************************

smime.p7s
Description: S/MIME cryptographic signature

------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users