On 2014-05-23 09:14, Brady, Mike wrote:
> On 2014-05-05 00:41, Kern Sibbald wrote:
>> On 04/25/2014 10:07 PM, Brady, Mike wrote:
>>> On 2014-04-25 11:13, Brady, Mike wrote:
>>>> On 2014-04-25 09:17, Kern Sibbald wrote:
>>>>> On 04/24/2014 10:37 PM, Brady, Mike wrote:
>>>>>> On 2014-04-25 07:59, Brady, Mike wrote:
>>>>>>> I am doing some testing with Bacula 7 and amongst other things am
>>>>>>> looking at the prune expired and truncate console commands.
>>>>>>>
>>>>>>> I have added the following runscript to the BackupCatalog job
>>>>>>>
>>>>>>> RunScript {
>>>>>>> RunsWhen=Before
>>>>>>> RunsOnClient=No
>>>>>>> Console = "prune expired volume yes"
>>>>>>> Console = "truncate allpools storage=FileStorage01"
>>>>>>> }
>>>>>>>
>>>>>>> This appears to be working in that the appropriate volumes are
>>>>>>> being
>>>>>>> truncated when they should be, but all I see in the log is
>>>>>>>
>>>>>>> 25-Apr 00:10 bacula03-dir JobId 12490: console command: run
>>>>>>> BeforeJob
>>>>>>> "prune expired volume yes"
>>>>>>> 25-Apr 00:10 bacula03-dir JobId 12490: console command: run
>>>>>>> BeforeJob
>>>>>>> "truncate allpools storage=FileStorage01"
>>>>>>>
>>>>>>> When I run these commands in bconsole there is always output.
>>>>>>> Even
>>>>>>> if
>>>>>>> it is just to say that there are no volumes to truncate, so I had
>>>>>>> expected to see this output in the log under JobId 0. Is console
>>>>>>> command
>>>>>>> output no logger logged from runscripts or am I missing
>>>>>>> something?
>>>>>>>
>>>>>>> Thanks
>>>>>>>
>>>>>>> Mike
>>>>>>>
>>>>>> I just got the 3 days worth of JobId 0 log entries in the log in
>>>>>> one
>>>>>> go,
>>>>>> including all the output I had expected from the prune expired and
>>>>>> truncate commands.
>>>>>>
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: No Volumes found to perform
>>>>>> truncate
>>>>>> action.
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 23-Apr 06:58 bacula03-dir JobId 0: No Volumes found to perform
>>>>>> truncate
>>>>>> action.
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: The current Volume
>>>>>> "IncPool-0109"
>>>>>> retention period is: 14 days
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: There are no more Jobs
>>>>>> associated
>>>>>> with Volume "IncPool-0109". Marking it purged.
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Connecting to Storage daemon
>>>>>> FileStorage01 at 192.168.42.45:9103 ...
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=212
>>>>>> DVD=0
>>>>>> Volume="IncPool-0109" Device="FileDevice01"
>>>>>> (/bacula_storage/FileDevice)
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: The volume "IncPool-0109" has
>>>>>> been
>>>>>> truncated
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 24-Apr 00:10 bacula03-dir JobId 0: No Volumes found to perform
>>>>>> truncate
>>>>>> action.
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The current Volume
>>>>>> "CatalogBackup0344" retention period is: 14 days
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: There are no more Jobs
>>>>>> associated
>>>>>> with Volume "CatalogBackup0344". Marking it purged.
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The current Volume
>>>>>> "CatalogBackup0242" retention period is: 14 days
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: There are no more Jobs
>>>>>> associated
>>>>>> with Volume "CatalogBackup0242". Marking it purged.
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The current Volume
>>>>>> "CatalogBackup0241" retention period is: 14 days
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: There are no more Jobs
>>>>>> associated
>>>>>> with Volume "CatalogBackup0241". Marking it purged.
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The current Volume
>>>>>> "IncPool-0128"
>>>>>> retention period is: 14 days
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: There are no more Jobs
>>>>>> associated
>>>>>> with Volume "IncPool-0128". Marking it purged.
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Connecting to Storage daemon
>>>>>> FileStorage01 at 192.168.42.45:9103 ...
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=217
>>>>>> DVD=0
>>>>>> Volume="CatalogBackup0344" Device="FileDevice01"
>>>>>> (/bacula_storage/FileDevice)
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0344"
>>>>>> has
>>>>>> been truncated
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=217
>>>>>> DVD=0
>>>>>> Volume="CatalogBackup0241" Device="FileDevice01"
>>>>>> (/bacula_storage/FileDevice)
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0241"
>>>>>> has
>>>>>> been truncated
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=217
>>>>>> DVD=0
>>>>>> Volume="CatalogBackup0242" Device="FileDevice01"
>>>>>> (/bacula_storage/FileDevice)
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0242"
>>>>>> has
>>>>>> been truncated
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=212
>>>>>> DVD=0
>>>>>> Volume="IncPool-0128" Device="FileDevice01"
>>>>>> (/bacula_storage/FileDevice)
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: The volume "IncPool-0128" has
>>>>>> been
>>>>>> truncated
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>>>> MyCatalog
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>>>> 25-Apr 00:10 bacula03-dir JobId 0: No Volumes found to perform
>>>>>> truncate
>>>>>> action.
>>>>>>
>>>>>> I do not know what triggered it. I was doing stuff in bconsole. I
>>>>>> am
>>>>>> guessing that JobId 0 messages were being spooled until the job
>>>>>> "finished" and something I did "finished" it?
>>>>> It is quite likely that many of these messages are queued now
>>>>> Qmsg()
>>>>> this means that they come out at the end of the job. The reason
>>>>> for
>>>>> queuing certain types of messages is to avoid race conditions that
>>>>> can
>>>>> happen particularly when you do things like console commands inside
>>>>> running jobs. Normally queuing does not matter much except that
>>>>> the
>>>>> messages are not in chronological order (annoying) but if you are
>>>>> trying
>>>>> to see them in real-time while the job is running, it won't work.
>>>>>
>>>>> Best regards,
>>>>> Kern
>>>>>
>>>>>> I do not think that this
>>>>>> was the behaviour in Bacula 5.x.
>>>>>>
>>>>>> Is this a bug or is there something that I am missing in my
>>>>>> configuration.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> Mike
>>>>>>
>>>> I was not trying to view the messages in real time while the job was
>>>> running. The BackupCatalog job is scheduled to run at 0010 every
>>>> day.
>>>> All the messages for that BackupCatalog JobId are logged/emailed as
>>>> expected when the job completes. I was looking at the logs after
>>>> the
>>>> fact.
>>>>
>>>> The full output from last nights BackupCatalog job is below.
>>>>
>>>> ============ BEGIN LOG ======================
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: shell command: run BeforeJob
>>>> "/usr/libexec/bacula/make_catalog_backup.pl MyCatalog"
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: console command: run
>>>> BeforeJob
>>>> "prune expired volume yes"
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: console command: run
>>>> BeforeJob
>>>> "truncate allpools storage=FileStorage01"
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: console command: run
>>>> BeforeJob
>>>> "truncate allpools storage=FileStorage02"
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: Start Backup JobId 12490,
>>>> Job=BackupCatalog.2014-04-25_00.10.00_28
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: Using Device "FileDevice01"
>>>> to
>>>> write.
>>>> 25-Apr 00:10 bacula03-sd JobId 12490: Volume "CatalogBackup0243"
>>>> previously written, moving to end of data.
>>>> 25-Apr 00:10 bacula03-sd JobId 12490: Ready to append to end of
>>>> Volume
>>>> "CatalogBackup0243" size=422,687,066
>>>> 25-Apr 00:10 bacula03-sd JobId 12490: Elapsed time=00:00:06,
>>>> Transfer
>>>> rate=4.214 M Bytes/second
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: Bacula bacula03-dir 7.0.2
>>>> (02Apr14):
>>>> Build OS: x86_64-redhat-linux-gnu redhat Enterprise
>>>> release
>>>> JobId: 12490
>>>> Job: BackupCatalog.2014-04-25_00.10.00_28
>>>> Backup Level: Full
>>>> Client: "bacula03-fd" 7.0.2 (02Apr14)
>>>> x86_64-redhat-linux-gnu,redhat,Enterprise release
>>>> FileSet: "Catalog" 2012-07-31 23:10:00
>>>> Pool: "CatalogBackupPool" (From Job resource)
>>>> Catalog: "MyCatalog" (From Client resource)
>>>> Storage: "FileStorage01" (From Job resource)
>>>> Scheduled time: 25-Apr-2014 00:10:00
>>>> Start time: 25-Apr-2014 00:10:05
>>>> End time: 25-Apr-2014 00:10:11
>>>> Elapsed time: 6 secs
>>>> Priority: 11
>>>> FD Files Written: 1
>>>> SD Files Written: 1
>>>> FD Bytes Written: 25,286,874 (25.28 MB)
>>>> SD Bytes Written: 25,286,991 (25.28 MB)
>>>> Rate: 4214.5 KB/s
>>>> Software Compression: 67.9% 3.1:1
>>>> VSS: no
>>>> Encryption: no
>>>> Accurate: no
>>>> Volume name(s): CatalogBackup0243
>>>> Volume Session Id: 317
>>>> Volume Session Time: 1397354160
>>>> Last Volume Bytes: 448,003,057 (448.0 MB)
>>>> Non-fatal FD errors: 0
>>>> SD Errors: 0
>>>> FD termination status: OK
>>>> SD termination status: OK
>>>> Termination: Backup OK
>>>>
>>>> 25-Apr 00:10 bacula03-dir JobId 12490: shell command: run AfterJob
>>>> "/usr/libexec/bacula/delete_catalog_backup"
>>>> ========== END LOG ======================
>>>>
>>>> There is no output for the runscript console commands associated
>>>> with
>>>> this job or the previous nights jobs.
>>>>
>>>> The JobId 0 log output in my previous email was all written to the
>>>> log
>>>> at 0745 25 April 2014 in one go. That is output for the 3 previous
>>>> nights jobs all together. It was a direct cut and paste from the
>>>> log.
>>>> I did not remove any lines. At 0745 I was in bconsole doing stuff.
>>>> I
>>>> wasn't watching the log at the time so I am not sure exactly what it
>>>> was
>>>> that I did to trigger the output. I am guessing that console
>>>> command
>>>> messages are not coming through because they are going against JobId
>>>> 0
>>>> (not the BackupCatalog jobid) and that JobId 0 is not completing so
>>>> the
>>>> messages are never sent?
>>>>
>>>> In 5.2 the runscript console commands were logged at the "same" time
>>>> of
>>>> the job. Looking at some logs from a couple of weeks ago they look
>>>> like
>>>> they were always logged before the messages from the job that had
>>>> the
>>>> runscript in them, which is not a problem. The important thing is
>>>> that
>>>> they are in the log. An example is below.
>>>>
>>>> =========== BEGIN LOG ======================
>>>> 11-Apr 00:10 bacula03-dir JobId 0:
>>>> This command can be DANGEROUS!!!
>>>>
>>>> It purges (deletes) all Files from a Job,
>>>> JobId, Client or Volume; or it purges (deletes)
>>>> all Jobs from a Client or Volume without regard
>>>> to retention periods. Normally you should use the
>>>> PRUNE command, which respects retention periods.
>>>> 11-Apr 00:10 bacula03-dir JobId 0: Automatically selected Catalog:
>>>> MyCatalog
>>>> 11-Apr 00:10 bacula03-dir JobId 0: Using Catalog "MyCatalog"
>>>> 11-Apr 00:10 bacula03-dir JobId 0: Connecting to Storage daemon
>>>> FileStorage01 at 192.168.42.45:9103 ...
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0165" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0165"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0098" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0098"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0062" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0062"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0289" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0289"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0103" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0103"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0097" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0097"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0042" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0042"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0138" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0138"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0052" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0052"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0290" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0290"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0269" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0269"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0113" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0113"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0175" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0175"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0185" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0185"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 0: 3000 OK label. VolBytes=219 DVD=0
>>>> Volume="CatalogBackup0270" Device="FileDevice01"
>>>> (/bacula_storage/FileDevice)
>>>> 11-Apr 00:10 bacula03-dir JobId 0: The volume "CatalogBackup0270"
>>>> has
>>>> been truncated
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: shell command: run BeforeJob
>>>> "/usr/libexec/bacula/make_catalog_backup.pl MyCatalog"
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: Start Backup JobId 12100,
>>>> Job=BackupCatalog.2014-04-11_00.10.00_38
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: Recycled volume
>>>> "CatalogBackup0243"
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: Using Device "FileDevice01"
>>>> to
>>>> write.
>>>> 11-Apr 00:10 bacula03-sd JobId 12100: Recycled volume
>>>> "CatalogBackup0243" on device "FileDevice01"
>>>> (/bacula_storage/FileDevice), all previous data lost.
>>>> 11-Apr 00:10 bacula03-sd JobId 12100: Elapsed time=00:00:05,
>>>> Transfer
>>>> rate=4.875 M Bytes/second
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: Bacula bacula03-dir 5.2.13
>>>> (19Jan13):
>>>> Build OS: x86_64-redhat-linux-gnu redhat Enterprise
>>>> release
>>>> JobId: 12100
>>>> Job: BackupCatalog.2014-04-11_00.10.00_38
>>>> Backup Level: Full
>>>> Client: "bacula03-fd" 5.2.13 (19Jan13)
>>>> x86_64-redhat-linux-gnu,redhat,Enterprise release
>>>> FileSet: "Catalog" 2012-07-31 23:10:00
>>>> Pool: "CatalogBackupPool" (From Job resource)
>>>> Catalog: "MyCatalog" (From Client resource)
>>>> Storage: "FileStorage01" (From Job resource)
>>>> Scheduled time: 11-Apr-2014 00:10:00
>>>> Start time: 11-Apr-2014 00:10:05
>>>> End time: 11-Apr-2014 00:10:10
>>>> Elapsed time: 5 secs
>>>> Priority: 11
>>>> FD Files Written: 1
>>>> SD Files Written: 1
>>>> FD Bytes Written: 24,377,895 (24.37 MB)
>>>> SD Bytes Written: 24,378,012 (24.37 MB)
>>>> Rate: 4875.6 KB/s
>>>> Software Compression: 67.8 %
>>>> VSS: no
>>>> Encryption: no
>>>> Accurate: no
>>>> Volume name(s): CatalogBackup0243
>>>> Volume Session Id: 112
>>>> Volume Session Time: 1396657274
>>>> Last Volume Bytes: 24,406,180 (24.40 MB)
>>>> Non-fatal FD errors: 0
>>>> SD Errors: 0
>>>> FD termination status: OK
>>>> SD termination status: OK
>>>> Termination: Backup OK
>>>>
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: shell command: run AfterJob
>>>> "/usr/libexec/bacula/delete_catalog_backup"
>>>> 11-Apr 00:10 bacula03-dir JobId 12100: console command: run AfterJob
>>>> "purge volume action=all allpools storage=FileStorage01"
>>>> ============= END LOG ====================
>>>>
>>>> Thanks for your help.
>>>>
>>>> Mike
>>>>
>>> Running the reload command in bconsole is what causes the JobId 0
>>> messages to be written to the log.
>>>
>>> I can easily recreate this by running my BackupCatalog job (which has
>>> the console commands in it), waiting for it finish and write its log
>>> entries and then running the reload.
>>>
>>> Is this a bug or am I doing something wrong?
>>
>> I believe that I have fixed this. Try the Bacula version that is in
>> the
>> public repository. I hope to release it next week (possibly the week
>> after) as 7.0.3. If it still fails, and I can find out why, there is
>> a
>> good chance I can fix it.
>>
>> Kern
>>
>>>
>>> Thanks
>>>
>>> Mike
>>>
>
> Kern
>
> This has not been resolved in 7.0.3. I have reopened the ticket
> (http://bugs.bacula.org/view.php?id=2054), but forgot to respond here
> as well.
>
> Regards
>
> Mike
And then I managed to only send it to Kern. So once again for the list.
------------------------------------------------------------------------------
"Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE
Instantly run your Selenium tests across 300+ browser/OS combos.
Get unparalleled scalability from the best Selenium testing platform available
Simple to use. Nothing to install. Get started now for free."
http://p.sf.net/sfu/SauceLabs
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
