Hi!
So, this is not the problem :)
Maybe you should check for network communication problems with some telnet commands:
- from client (192.168.0.X) to bacula-sd (192.168.0.5): telnet on port 9103
- from client (192.168.0.X) to bacula-sd (1G network ip address): telnet on port 9103
- from client (192.168.0.X) to bacula-dir (192.168.0.Y): telnet on port 9101
- from director (192.168.0.Y) to client (192.168.0.X): telnet on port 9102
- from client (192.168.0.X) to bacula-dir (1G network ip address): telnet on port 9101
- from director (1G network ip address) to client (192.168.0.X): telnet on port 9102
- from director (192.168.0.Y) to bacula-sd (192.168.0.5): telnet on port 9103
- from bacula-sd (192.168.0.5) to director (192.168.0.Y): telnet on port 9101
Don´t know if your director and bacula-sd are on the same host. If so, they should be able to talk to each other.
Regards,
Ana