Dear,
After a bad power-off bacula server, the storage is not able to see correct pool-volumes assignment for LTO3 device:
Device status:
Autochanger "TSM3500" with devices:
"ULT3580-TD3" (/dev/nst0)
"ULT3580-TD5" (/dev/nst1)
Device "FileStorage" is not open or does not exist.
Device "ULT3580-TD3" (/dev/nst0) is mounted with:
Volume: L30001L3
Pool: *unknown*
Media type: LTO-3
Slot 3 is loaded in drive 1.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
Device "ULT3580-TD5" (/dev/nst1) is mounted with:
Volume: B00692LV
Pool: Pool1
Media type: LTO-5
Slot 40 is loaded in drive 0.
Total Bytes=1,024 Blocks=0 Bytes/block=1,024
Positioned at File=0 Block=0
====
But the volumes from pool are correctly showed:
*list volume pool=Incr
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 10 | L30016L3 | Full | 1 | 430,674,056,192 | 910 | 31,536,000 | 1 | 17 | 1 | LTO-3 | 2013-07-21 09:40:44 |
| 61 | L30006L3 | Append | 1 | 18,680,747,008 | 21 | 31,536,000 | 1 | 7 | 1 | LTO-3 | 2013-07-27 18:08:20 |
| 67 | L30010L3 | Append | 1 | 1,024 | 0 | 7,776,000 | 1 | 11 | 1 | LTO-3 | 0000-00-00 00:00:00 |
| 68 | L30017L3 | Append | 1 | 37,661,717,504 | 46 | 7,776,000 | 1 | 18 | 1 | LTO-3 | 2013-07-31 19:56:15 |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
