Re: [Bacula-users] Autochanger Tape Library Problem

Hello,

2013/2/8 "Jürgen Ecker" <trexman AT gmx DOT de>

Hi,

if i start a job in bacula which should write to a tape library, then i get the following error.

Fatal error: Device reservation failed for JobId=83: 1998 Volume "VolServer-0374" status is Append, not in Pool.

Storage daemon didn't accept Device "Tape" because:
3924 Device "Tape" not in SD Device resources.

Here my configs:

bacula-dir.conf

Storage {
Name = Autochanger
Address = 10.0.0.10
SDPort = 9103
Password = "password"
Device = Tape
Autochanger = yes
Media Type = LT0
}

This is Media Type LT"Zero"

Pool {
Name = Tape
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 28 days
Maximum Volume Bytes = 4G
Maximum Volumes = 1000
}

bacula-sd.conf

Autochanger {
Name = Tape
Device = LTO-4
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg3
}

Device {
Name = LTO-4
Drive Index = 0
Media Type = LTO
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
Label Media = no
}

Here we have Media Type LTO, which did not match above definitions.

Please correct it and check again.

best regards

--
Radosław Korzeniewski
radoslaw AT korzeniewski DOT net

------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013 
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users