I have a problem with my library. I always get an error when i make a backup or restore, but the backup and restore successfully completed.
[...]
Tape
Error: dev.c:506 Unable to open device "DELL-TL4000" (/dev/nst0): ERR=No medium found
Tape Ready to append to end of Volume "000024L3" at file=478.
bacula-dir Start Backup JobId 799, Job=vps-appsys.2012-06-13_03.05.00_15
bacula-dir Using Device "DELL-TL4000"
Tape End of Volume "000024L3" at 495:2311 on device "DELL-TL4000" (/dev/nst0). Write of 131072 bytes got -1.
Tape 3307 Issuing autochanger "unload slot 11, drive 0" command.
Re-read of last block succeeded.
End of medium on Volume "000024L3" Bytes=486,472,900,608 Blocks=3,711,500 at 13-Jun-2012 03:10.
Tape 3301 Issuing autochanger "loaded? drive 0" command.
Tape 3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 10, drive 0" command.
Tape 3305 Autochanger "load slot 10, drive 0", status is OK.
Tape
Error: dev.c:506 Unable to open device "DELL-TL4000" (/dev/nst0): ERR=No medium found
Recycled volume "000042L3" on device "DELL-TL4000" (/dev/nst0), all previous data lost.
New volume "000042L3" mounted on device "DELL-TL4000" (/dev/nst0) at 13-Jun-2012 03:12.
bacula-dir Recycled volume "000042L3"
All records pruned from Volume "000042L3"; marking it "Purged"
There are no more Jobs associated with Volume "000042L3". Marking it purged.
mydomain.tld shell command: run ClientAfterJob "/etc/bacula/deletesnapshot.sh"
Tape Job write elapsed time = 00:56:11, Transfer rate = 50.24 M Bytes/second
mydomain.tld ClientAfterJob: Logical volume "vpssnapshot" successfully removed
bacula-dir End auto prune.
Pruned Files from 1 Jobs for client mydomain.tld from catalog.
Pruned 1 Job for client mydomain.tld from catalog.
Begin pruning Files.
Begin pruning Jobs older than 14 days .
Bacula bacula-dir 5.2.6 (21Feb12):
Build OS: x86_64-redhat-linux-gnu redhat Enterprise release
JobId: 799
Job: vps-appsys.2012-06-13_03.05.00_15
Backup Level: Full
Client: "mydomain.tld" 5.2.6 (21Feb12) x86_64-redhat-linux-gnu,redhat,Enterprise release
FileSet: "vps-snapshot" 2012-03-05 07:47:28
Pool: "Tapepool" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "DELL-TL4000" (From Pool resource)
Scheduled time: 13-Jun-2012 03:05:00
Start time: 13-Jun-2012 03:05:06
End time: 13-Jun-2012 04:05:25
Elapsed time: 1 hour 19 secs
Priority: 10
FD Files Written: 1
SD Files Written: 1
FD Bytes Written: 169,372,745,728 (169.3 GB)
SD Bytes Written: 169,372,745,841 (169.3 GB)
Rate: 46801.0 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): 000024L3|000042L3
Volume Session Id: 35
Volume Session Time: 1339016400
Last Volume Bytes: 152,148,271,104 (152.1 GB)
Non-fatal FD errors: 0
SD Errors: 2
FD termination status: OK
SD termination status: OK
Termination: Backup OK -- with warnings
I tested my device with the dell tape util, but does not found errors. The backup work with tar and mtx commands without problems.
Any idea?
Best regards,