Re: [Bacula-users] Quantum LTO-5 SAS (LSI)
2012-05-11 09:54:14
Tip: It's much easier to write RTFM. If it was trivial I wouldn't waste the bandwidth. Please do the same if you having nothing to offer.
Hello, 2012/5/9 Robert Moggach <rob AT dashing DOT tv>
I'm having trouble connecting to a Quantum LTO-5 HH with LSI SAS HBA.
I've updated all firmwares per LSI support and can see the device quite clearly.
I've run the tests and they all pass swimmingly.
What kind of tests do you performed?
[root@ohara log]# lsscsi
[0:0:0:0] tape QUANTUM ULTRIUM 5 3085 /dev/st0
[root@ohara log]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUANTUM Model: ULTRIUM 5 Rev: 3085
Type: Sequential-Access ANSI SCSI revision: 06
Can anyone help with a working Storage and Device config?
Use a template available in standard bacula-dir.conf and bacula-sd.conf. Choose your favorite names and correct a device path. Test it with btape. Done.
best regards
--
Radosław Korzeniewski radoslaw AT korzeniewski DOT net
|
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|