Hi, I tried to follow your instructions but getting the following error
> .. the backup job is now running. When complete, the results will be shown
> below ..
> 01-Nov 16:45 bacula-dir JobId 17: Start Backup JobId 17,
> Job=jobFC13OnIomega1.2010-11-01_16.45.24_06
> 01-Nov 16:45 bacula-sd JobId 17: Fatal error: Device reservation failed for
> JobId=17:
> 01-Nov 16:45 bacula-dir JobId 17: Fatal error:
> Storage daemon didn't accept Device "DRRemotedevice" because:
> 3924 Device "DRRemotedevice" not in SD Device resources.
> 01-Nov 16:45 bacula-dir JobId 17: Error: Bacula bacula-dir 5.0.2 (28Apr10):
> 01-Nov-2010 16:45:26
> Build OS: x86_64-redhat-linux-gnu redhat
> JobId: 17
> Job: jobFC13OnIomega1.2010-11-01_16.45.24_06
> Backup Level: Full
> Client: "bacula-fd" 5.0.2 (28Apr10)
> x86_64-redhat-linux-gnu,redhat,
> FileSet: "AllFC13" 2010-10-31 14:16:18
> Pool: "DRRemotepool" (From Job resource)
> Catalog: "MyCatalog" (From Client resource)
> Storage: "File1" (From Job resource)
> Scheduled time: 01-Nov-2010 16:45:24
> Start time: 01-Nov-2010 16:45:26
> End time: 01-Nov-2010 16:45:26
> Elapsed time: 0 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Encryption: no
> Accurate: no
> Volume name(s):
> Volume Session Id: 1
> Volume Session Time: 1288626300
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status:
> SD termination status:
> Termination: *** Backup Error ***
Here is my bacula-dir file
>
> #
> # Default Bacula Storage Daemon Configuration file
> #
> # For Bacula release 5.0.2 (28 April 2010) -- redhat
> #
> # You may need to change the name of your tape drive
> # on the "Archive Device" directive in the Device
> # resource. If you change the Name and/or the
> # "Media Type" in the Device resource, please ensure
> # that dird.conf has corresponding changes.
> #
>
> Storage { # definition of myself
> Name = bacula-sd
> SDPort = 9103 # Director's port
> WorkingDirectory = "/var/spool/bacula"
> Pid Directory = "/var/run"
> Maximum Concurrent Jobs = 20
> }
>
> #
> # List Directors who are permitted to contact Storage daemon
> #
> Director {
> Name = bacula-dir
> Password = "123456"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # status of the storage daemon
> #
> Director {
> Name = bacula-mon
> Password = "123456"
> Monitor = yes
> }
>
> #
> # Note, for a list of additional Device templates please
> # see the directory <bacula-source>/examples/devices
> # Or follow the following link:
> #
> http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
> #
>
> #
> # Devices supported by this Storage daemon
> # To connect, the Director's bacula-dir.conf must have the
> # same Name and MediaType.
> #
>
> Device {
> Name = FileStorage
> Media Type = File
> Archive Device = /media/Backup
> LabelMedia = yes; # lets Bacula label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> }
> Device {
> Name = DRRemotedevice
> Archive Device = /mnt/publiciomega1/SalamLinux/BackupFC13
> Media Type = File1
> LabelMedia = yes
> Random Access = yes
> AutomaticMount = yes
> RemovableMedia = no
> AlwaysOpen = no
> }
> #
> # An autochanger device with two drives
> #
> #Autochanger {
> # Name = Autochanger
> # Device = Drive-1
> # Device = Drive-2
> # Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> # Changer Device = /dev/sg0
> #}
>
> #Device {
> # Name = Drive-1 #
> # Drive Index = 0
> # Media Type = DLT-8000
> # Archive Device = /dev/nst0
> # AutomaticMount = yes; # when device opened, read it
> # AlwaysOpen = yes;
> # RemovableMedia = yes;
> # RandomAccess = no;
> # AutoChanger = yes
> # #
> # # Enable the Alert command only if you have the mtx package loaded
> # # Note, apparently on some systems, tapeinfo resets the SCSI controller
> # # thus if you turn this on, make sure it does not reset your SCSI
> # # controller. I have never had any problems, and smartctl does
> # # not seem to cause such problems.
> # #
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> #}
>
> #Device {
> # Name = Drive-2 #
> # Drive Index = 1
> # Media Type = DLT-8000
> # Archive Device = /dev/nst1
> # AutomaticMount = yes; # when device opened, read it
> # AlwaysOpen = yes;
> # RemovableMedia = yes;
> # RandomAccess = no;
> # AutoChanger = yes
> # # Enable the Alert command only if you have the mtx package loaded
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> #}
>
> #
> # A Linux or Solaris LTO-2 tape drive
> #
> #Device {
> # Name = LTO-2
> # Media Type = LTO-2
> # Archive Device = /dev/nst0
> # AutomaticMount = yes; # when device opened, read it
> # AlwaysOpen = yes;
> # RemovableMedia = yes;
> # RandomAccess = no;
> # Maximum File Size = 3GB
> ## Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> ## Changer Device = /dev/sg0
> ## AutoChanger = yes
> # # Enable the Alert command only if you have the mtx package loaded
> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> ## If you have smartctl, enable this, it has more info than tapeinfo
> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
> #}
>
> #
> # A Linux or Solaris LTO-3 tape drive
> #
> #Device {
> # Name = LTO-3
> # Media Type = LTO-3
> # Archive Device = /dev/nst0
> # AutomaticMount = yes; # when device opened, read it
> # AlwaysOpen = yes;
> # RemovableMedia = yes;
> # RandomAccess = no;
> # Maximum File Size = 4GB
> ## Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> ## Changer Device = /dev/sg0
> ## AutoChanger = yes
> # # Enable the Alert command only if you have the mtx package loaded
> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> ## If you have smartctl, enable this, it has more info than tapeinfo
> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
> #}
>
> #
> # A Linux or Solaris LTO-4 tape drive
> #
> #Device {
> # Name = LTO-4
> # Media Type = LTO-4
> # Archive Device = /dev/nst0
> # AutomaticMount = yes; # when device opened, read it
> # AlwaysOpen = yes;
> # RemovableMedia = yes;
> # RandomAccess = no;
> # Maximum File Size = 5GB
> ## Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
> ## Changer Device = /dev/sg0
> ## AutoChanger = yes
> # # Enable the Alert command only if you have the mtx package loaded
> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> ## If you have smartctl, enable this, it has more info than tapeinfo
> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
> #}
>
>
>
>
> #
> # A FreeBSD tape drive
> #
> #Device {
> # Name = DDS-4
> # Description = "DDS-4 for FreeBSD"
> # Media Type = DDS-4
> # Archive Device = /dev/nsa1
> # AutomaticMount = yes; # when device opened, read it
> # AlwaysOpen = yes
> # Offline On Unmount = no
> # Hardware End of Medium = no
> # BSF at EOM = yes
> # Backward Space Record = no
> # Fast Forward Space File = no
> # TWO EOF = yes
> # If you have smartctl, enable this, it has more info than tapeinfo
> # Alert Command = "sh -c 'smartctl -H -l error %c'"
> #}
>
> #
> # Send all messages to the Director,
> # mount messages also are sent to the email address
> #
> Messages {
> Name = Standard
> director = bacula-dir = all
> }
and here is my bacula-sd
> Storage { # definition of myself
> Name = bacula-sd
> SDPort = 9103 # Director's port
> WorkingDirectory = "/var/spool/bacula"
> Pid Directory = "/var/run"
> Maximum Concurrent Jobs = 20
> }
>
> #
> # List Directors who are permitted to contact Storage daemon
> #
> Director {
> Name = bacula-dir
> Password = "123456"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # status of the storage daemon
> #
> Director {
> Name = bacula-mon
> Password = "123456"
> Monitor = yes
> }
>
> #
> # Note, for a list of additional Device templates please
> # see the directory <bacula-source>/examples/devices
> # Or follow the following link:
> #
> http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
> #
>
> #
> # Devices supported by this Storage daemon
> # To connect, the Director's bacula-dir.conf must have the
> # same Name and MediaType.
> #
>
> Device {
> Name = FileStorage
> Media Type = File
> Archive Device = /media/Backup
> LabelMedia = yes; # lets Bacula label unlabeled media
> Random Access = Yes;
> AutomaticMount = yes; # when device opened, read it
> RemovableMedia = no;
> AlwaysOpen = no;
> }
> Device {
> Name = DRRemotedevice
> Archive Device = /mnt/publiciomega1/SalamLinux/BackupFC13
> Media Type = File1
> LabelMedia = yes
> Random Access = yes
> AutomaticMount = yes
> RemovableMedia = no
> AlwaysOpen = no
> }
>
>
+----------------------------------------------------------------------
|This was sent by salamlinux AT free DOT fr via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
Nokia and AT&T present the 2010 Calling All Innovators-North America contest
Create new apps & games for the Nokia N8 for consumers in U.S. and Canada
$10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing
Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
http://p.sf.net/sfu/nokia-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|