Hello,
I am running a full back up with a size of "estimate files=983,529
bytes=306,761,539,624", the backup started normally and used up 1 full tape
160GB (uncompressed), then it switched tapes and continued to copy data to
the second tape, but all of the sudden it stops and bacula starts
complaining with: "JobId 2: Warning: Unable add Scratch Volume, Pool
"Full-Pool-dsk-tpe" full MaxVols=2"
list media shows:
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
|
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 1 | CNH910 | Full | 1 | 164,989,504,512 | 166 |
2,592,000 | 1 | 1 | 1 | tape | 2010-08-10 20:53:33
|
| 2 | CNH911 | Used | 1 | 142,552,940,544 | 143 |
2,592,000 | 1 | 2 | 1 | tape | 2010-08-11 00:53:24
|
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
Both tapes are the same, both of them are capable of storing 160GB of
uncompressed data. Why is it still asking for more tapes?
Also, status on director shows:
One is marked Full the other is marked Used so neither tape is usable.
Full means the tape is full. Used means that you have configured