On Fri, Aug 6, 2010 at 11:16 AM, sid009 <bacula-forum AT backupcentral DOT com> 
wrote:
>
>> That is bad. Each line should have a Volume tag. Do you only have
>> labels on 1 tape?
>
>
> Thanks for pointing this out I would have never noticed. Only one volume was 
> being shown because I had put a barcode on one tape to test the re-labelling. 
> I have now put barcodes on all tapes, see below:
>
>
> root@xxx# mtx status
>  Storage Changer /dev/changer:1 Drives, 7 Slots ( 0 Import/Export )
> Data Transfer Element 0:Empty
>      Storage Element 1:Full :VolumeTag=LT1005L1
>      Storage Element 2:Full :VolumeTag=LT1006L1
>      Storage Element 3:Full :VolumeTag=LT1007L1
>      Storage Element 4:Full :VolumeTag=LT1000L1
>      Storage Element 5:Full :VolumeTag=LT1001L1
>      Storage Element 6:Full :VolumeTag=LT1002L1
>      Storage Element 7:Full :VolumeTag=LT1003L1
>
> The next steps would be to delete the labels and recreate them?
>
Most likely yes.
Do you have any valuable backups on the tapes?

John

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev 
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users