I had a back log of jobs that were in the running que
yesterday, consequently both tape drives were writing to tape. However, today
with only a few jobs in the running jobs que, only the one drive seems to be ‘running’.
Is there a parameter somewhere that I can tweak so that the 2nd drive
will always initiate a backup if more than than 1 runnings jobs are in the que?
Thanks,
Jj
JobId Level Name Status
======================================================================
465 Full magnum-onsite.2010-07-28_21.00.00_11 is
running
466 Increme kojak-onsite.2010-07-28_22.00.00_24 is
waiting on max Storage jobs
467 Full grey-onsite.2010-07-28_22.00.00_25 is waiting
on max Storage jobs
468 Increme red-onsite.2010-07-28_22.00.00_26 is waiting
on max Storage jobs
469 Full
magnum-offsite.2010-07-29_02.00.00_15 is waiting on max Storage jobs
Device status:
Autochanger "ADIC_Scalar_24" with devices:
"Drive1" (/dev/nst0)
"Drive2" (/dev/nst1)
Device "Drive1" (/dev/nst0) is mounted with:
Volume: KL0455
Pool: *unknown*
Media type: LTO2
Slot 12 is loaded in drive 0.
Total Bytes=432,372,584,448 Blocks=6,702,203
Bytes/block=64,512
Positioned at File=432 Block=6,204
Device "Drive2" (/dev/nst1) is mounted with:
Volume: 000090
Pool: *unknown*
Media type: LTO2
Slot 10 is loaded in drive 1.
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=0 Block=0
Device "FileStorage" (/tmp) is not open.
Jeremiah Jester
Senior Informatics Specialist
UW Microbiology - Katze Lab
Box 357242
P: 206-732-6185