Re: [Bacula-users] Please mount volume...
2010-07-16 16:51:44
I can do that. I've tried killing multiple jobs over the past days and this
message usually resurfaces.
Now that I've killed the job, I get another message for the next job requesting
a tape that is no longer in any of the slots? I'm guessing that KL0390 was
previously written to but probably on the shelf. Strange since I would only
remove a tape if it reported 'Full' and doubt it request it again.
JJ
(from messages)
16-Jul 13:45 bacula01-dir JobId 358: Start Backup JobId 358,
Job=james-onsite.2010-07-15_16.00.00_25
16-Jul 13:45 bacula01-dir JobId 358: Using Device "Drive1"
16-Jul 13:45 bacula01-sd JobId 358: Invalid slot=0 defined in catalog for
Volume "KL0390" on "Drive1" (/dev/st0). Manual load may be required.
16-Jul 13:45 bacula01-sd JobId 358: Invalid slot=0 defined in catalog for
Volume "KL0390" on "Drive1" (/dev/st0). Manual load may be required.
16-Jul 13:45 bacula01-sd JobId 358: Invalid slot=0 defined in catalog for
Volume "KL0390" on "Drive1" (/dev/st0). Manual load may be required.
16-Jul 13:45 bacula01-sd JobId 358: Invalid slot=0 defined in catalog for
Volume "KL0390" on "Drive1" (/dev/st0). Manual load may be required.
16-Jul 13:45 bacula01-sd JobId 358: Invalid slot=0 defined in catalog for
Volume "KL0390" on "Drive1" (/dev/st0). Manual load may be required.
16-Jul 13:45 bacula01-sd JobId 358: Please mount Volume "KL0390" or label a new
one for:
Job: james-onsite.2010-07-15_16.00.00_25
Storage: "Drive1" (/dev/st0)
Pool: Onsite
Media type: LTO2
====
*status slots
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
Enter autochanger drive[0]:
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "slots" command.
Device "ADIC_Scalar_24" has 22 slots.
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "list" command.
Slot | Volume Name | Status | Media Type | Pool
|
------+------------------+-----------+----------------------+--------------------|
1 | | | |
|
2 | KL0339 | Append | LTO2 |
Offsite |
3 | KL0423 | Error | LTO2 |
Offsite |
4 | 000098 | Error | LTO2 |
Onsite |
5 | KL0313 | Full | LTO2 |
Onsite |
6 | KL0392 | Full | LTO2 |
Offsite |
7 | KL0449 | Error | LTO2 |
Onsite |
8*| KL0444 | ? | ? |
? |
9 | KL0362 | Error | LTO2 |
Onsite |
10 | KL0324 | Error | LTO2 |
Onsite |
11 | 000082 | Full | LTO2 |
Onsite |
12 | KL0445 | Full | LTO2 |
Onsite |
13 | KL0367 | Full | LTO2 |
Onsite |
14 | KL0385 | Full | LTO2 |
Onsite |
15*| 000087 | ? | ? |
? |
16 | 000103 | Error | LTO2 |
Onsite |
17 | 000089 | Append | LTO2 |
Offsite |
18 | KL0391 | Error | LTO2 |
Onsite |
19 | KL0419 | Error | LTO2 |
Onsite |
20 | KL0325 | Append | LTO2 |
Offsite |
21 | KL0350 | Error | LTO2 |
Onsite |
22 | | | |
|
-----Original Message-----
From: John Drescher [mailto:drescherjm AT gmail DOT com]
Sent: Friday, July 16, 2010 1:42 PM
To: Jeremiah D. Jester
Cc: bacula-users
Subject: Re: [Bacula-users] Please mount volume...
> Yes, I tried mounting and unmounting multiple times. I just double checked
> the changer, KL0339 is loaded into Drive 1. (/dev/st0).
>
Is it okay that we kill the current job?
John
------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|