I keep on getting this error message despite having
additional appendable tapes in my offsite pool.
14-Jul 15:34 bacula01-sd
JobId 323: Please mount Volume "KL0339" or label a new one for:
Job:
baretta-offsite.2010-07-13_01.00.00_17
Storage:
"Drive1" (/dev/st0)
Pool: Offsite
Media type: LTO2
When I issue a ‘status slots’ and explicitly
mount KL0339 volume it loads the wrong tape (slot 1, instead of slot 2). This
seems very whacky. Output below…
Thanks,
JJ
VIEW CURRENT SLOTS STATUS
*status slots
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger drive[0]:
Connecting to Storage daemon Tape at
bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "slots" command.
Device "ADIC_Scalar_24" has 23 slots.
Connecting to Storage daemon Tape at
bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "list" command.
Slot | Volume Name | Status | Media Type
| Pool |
------+------------------+-----------+----------------------+--------------------|
1 | 000064 | Append | LTO2
| Onsite |
2 | KL0339 | Append | LTO2
| Offsite |
3 | KL0423 | Error | LTO2
| Offsite |
4 | 000098 | Append | LTO2
| Onsite |
5 | KL0313 | Append | LTO2
| Onsite |
6 | KL0392 | Full | LTO2
| Offsite |
7 | KL0449 | Append | LTO2
| Scratch |
8*| KL0444 | ? | ?
| ? |
9 | KL0362 | Append | LTO2
| Onsite |
10 | KL0324 | Append | LTO2
| Scratch |
11 | 000082 | Append | LTO2
| Onsite |
12 | KL0445 | Append | LTO2
| Onsite |
13 | KL0367 | Append | LTO2
| Onsite |
14 | KL0385 | Append | LTO2
| Onsite |
15*| 000087 | ? | ?
| ? |
16 | 000103 | Append | LTO2
| Scratch |
17 | 000089 | Append | LTO2
| Offsite |
18 | KL0391 | Append | LTO2
| Scratch |
19 | KL0419 | Append | LTO2
| Scratch |
20 | KL0325 | Append | LTO2
| Offsite |
21 | KL0350 | Append | LTO2
| Onsite |
22 | | |
| |
23 | | |
| |
TRYING TO MOUNT SLOT
2 (KL0339)
*mount
Tape
Enter autochanger drive[0]: 0
Enter autochanger slot: 2
3301 Issuing autochanger "loaded? drive 0"
command.
3302 Autochanger "loaded? drive 0", result:
nothing loaded.
3304 Issuing autochanger "load slot 2, drive 0"
command.
3305 Autochanger "load slot 2, drive 0", status is
OK.
3905 Device "Drive1" (/dev/st0) open but no Bacula
volume is mounted.
If this is not a blank tape, try unmounting and remounting
the Volume.
LOADS SLOT 1 TAPE INSTEAD OF SLOT 2
*status slots
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger drive[0]:
Connecting to Storage daemon Tape at
bacula.microslu.washington.edu:9103 ...
3306 Issuing autochanger "slots" command.
Device "ADIC_Scalar_24" has 23 slots.
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103
...
3306 Issuing autochanger "list" command.
Slot | Volume Name | Status | Media Type
| Pool |
------+------------------+-----------+----------------------+--------------------|
1 | | |
| |
2 | KL0339 | Append | LTO2
| Offsite |
3 | KL0423 | Error | LTO2
| Offsite |
4 | 000098 | Append | LTO2
| Onsite |
5 | KL0313 | Append | LTO2
| Onsite |
6 | KL0392 | Full | LTO2
| Offsite |
7 | KL0449 | Append | LTO2
| Scratch |
8*| KL0444 | ? | ?
| ? |
9 | KL0362 | Append | LTO2
| Onsite |
10 | KL0324 | Append | LTO2
| Scratch |
11 | 000082 | Append | LTO2
| Onsite |
12 | KL0445 | Append | LTO2
| Onsite |
13 | KL0367 | Append | LTO2
| Onsite |
14 | KL0385 | Append | LTO2
| Onsite |
15*| 000087 | ? | ?
| ? |
16 | 000103 | Append | LTO2
| Scratch |
17 | 000089 | Append | LTO2
| Offsite |
18 | KL0391 | Append | LTO2
| Scratch |
19 | KL0419 | Append | LTO2
| Scratch |
20 | KL0325 | Append | LTO2
| Offsite |
21 | KL0350 | Append | LTO2
| Onsite |
22 | | | |
|
23 | | |
| |