On 27/05/2010, at 01.34, randalls AT bioinfo.wsu DOT edu wrote:

> I have been using bacula for some time with an overland neo 2000.
>
> However, Sometimes I receive these errors:
>
> You have messages.
> *messages
> 26-May 16:07 mlbkp1-sd JobId 3152: 3304 Issuing autochanger "load  
> slot 17, drive 0" command.
> 26-May 16:08 mlbkp1-sd JobId 3152: 3305 Autochanger "load slot 17,  
> drive 0", status is OK.
> 26-May 16:08 mlbkp1-sd JobId 3152: Please mount Volume "000068L3" or  
> label a new one for:
>    Job:          FS1_Data_Home_Dirs.2010-05-26_16.07.00_04
>    Storage:      "neodrive-1" (/dev/st0)
>    Pool:         Mainlab-six-month-pool-incremental
>    Media type:   Ultrium-3
>
> Clearly the tap changer has loaded the tape into drive 0 from slot  
> 17, which I have verified actually does have volume 000068L3.
>
> So why does it say please mount volume or label a new one?  Why does  
> it keep saying this despite the fact the tape is loaded in the drive?
>
> Anyone know why.  Typically, I just label a new tape, and that fixes  
> the problem, but why the hell does it not just use the tape that it  
> loaded into the drive in the first place instead of complaining  
> about it.

Try to modify the mtx-changer script and add a " sleep 10" after the  
mtx load command. Some libraries return ón the mtx command before the  
tape is fully ready

Jesper


------------------------------------------------------------------------------

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users