[Bacula-users] End of Tape errors with HP LTO-4 drive on Linux
2010-04-14 02:34:56
Bacula works perfectly so far.
The only serious problem I have is End of Tape detection.
E.g. if I need to reboot the backup server, the current tape will be rewinded.
The next backup job then seems not to find the end of the last backup and the
tape will be set to Error state:
14-Apr 04:00 bacula-sd JobId 925: Volume "Weekly1" previously written, moving
to end of data.
14-Apr 04:23 bacula-sd JobId 925: Error: Unable to position to end of data on
device "LTO-4" (/dev/nst0): ERR=dev.c:954 ioctl MTEOM error on "LTO-4"
(/dev/nst0). ERR=Input/output error.
14-Apr 04:23 bacula-sd JobId 925: Marking Volume "Weekly1" in Error in Catalog.
I already tried playing with TWO EOF = yes/no with no luck.
Any ideas?
Robert
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] End of Tape errors with HP LTO-4 drive on Linux,
Robert Oschwald <=
|
|
|