Re: [Bacula-users] bacula and WORM cartridges

>>>>> On Mon, 01 Mar 2010 09:44:42 +0100, Albert Pauw said:
> 
> I am using bacula and a vtl (mhvtl) which actually works very nice.
> 
> Now I am experimenting with the WORM cartridges setting of mhvtl and 
> tried to get bacula to work with it.
> 
> Here is what works:
> 
> - Write data on the cartridge and rewind -> ok
> - Verify the data written -> ok
> - Try to write data again -> error -> that's what it should do
> - Add another set of data behind the data (mt -f /dev/nst0 EOD, and a 
> new tar command) -> ok
> - Verify that both sets can be retrieved -> ok
> 
> So, so far so good.
> 
> When I add this WORM tape to a bacula pool, I had to label it. 
> Unfortunately, I am not able to use the tape
> as bacula rewrites the label again when trying to use it, and gets an 
> error from the drive. Well, that's
> what I think is going wrong. So, is it actually possible to use a WORM 
> cartridge in bacula? And how
> do I do it?

I think Bacula can't work with WORM cartridges at the moment.  The label is
always part of the first tape file, but you have to label a tape before you
can use it.

__Martin

------------------------------------------------------------------------------
Download Intel&#174; Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users