Re: [Bacula-users] unable to use dell tl4000
2009-12-22 10:40:00
On Tue, Dec 22, 2009 at 9:46 AM, Ismail OZATAY <ismail AT ismailozatay DOT net>
wrote:
> Hello ,
>
> I bought a dell tl4000 tape libray with 2 drives. I am trying to use it
> and search and applied some example configs but i get some errors. I
> have put "AutomaticMount=yes" option but it wants me to mount it
> manually.Here is my configs ;
>
> Pool {
> Name = SenelikPool
> Pool Type = Backup
> Recycle = yes
> AutoPrune = yes
> Volume Retention = 365d
> Label Format = Full-
> }
>
> bacula-sd.conf
>
> Autochanger {
> Name = delltl4000
> Device = Drive-1, Drive-2
> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/sg5
> }
>
> Device {
> Name = Drive-1
> Drive Index = 0
> Media Type = LTO4
> Archive Device = /dev/st0
> Changer Device = /dev/sg5
> AutomaticMount = yes;
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> LabelMedia = yes;
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
> Device {
> Name = Drive-2
> Drive Index = 1
> Media Type = LTO4
> Archive Device = /dev/st1
> Changer Device = /dev/sg5
> AutomaticMount = yes;
> Autochanger = yes;
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> LabelMedia = yes;
> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> Alert Command = "sh -c 'smartctl -H -l error %c'"
> }
>
> When i run a job i get this error ;
>
> 22-Dec 15:22 backup-dir JobId 15: shell command: run BeforeJob
> "/usr/lib64/bacula/make_catalog_backup bacula bacula xxx"
> 22-Dec 15:22 backup-dir JobId 15: Start Backup JobId 15,
> Job=BackupCatalog.2009-12-22_15.22.16_42
> 22-Dec 15:22 backup-dir JobId 15: Using Device "Drive-1"
> 22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog for Volume
> "Full-0001" on "Drive-1" (/dev/st0). Manual load may be required.
> 22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog for Volume
> "Full-0001" on "Drive-1" (/dev/st0). Manual load may be required.
> 22-Dec 15:22 backup-sd JobId 15: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 22-Dec 15:22 backup-sd JobId 15: 3302 Autochanger "loaded? drive 0", result:
> nothing loaded.
> 22-Dec 15:22 backup-sd JobId 15: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 22-Dec 15:22 backup-sd JobId 15: 3302 Autochanger "loaded? drive 0", result:
> nothing loaded.
> 22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog for Volume
> "Full-0001" on "Drive-1" (/dev/st0). Manual load may be required.
>
> Here is my device status ;
>
> [root@backup bacula]# mtx -f /dev/sg5 status
> Storage Changer /dev/sg5:2 Drives, 47 Slots ( 3 Import/Export )
> Data Transfer Element 0:Empty
> Data Transfer Element 1:Empty
> Storage Element 1:Full :VolumeTag=000049L4
> Storage Element 2:Full :VolumeTag=000046L4
> Storage Element 3:Full :VolumeTag=000042L4
> Storage Element 4:Full :VolumeTag=000047L4
> Storage Element 5:Full :VolumeTag=000048L4
> Storage Element 6:Full :VolumeTag=000041L4
> Storage Element 7:Full :VolumeTag=000045L4
> Storage Element 8:Full :VolumeTag=000050L4
> Storage Element 9:Full :VolumeTag=000029L4
> Storage Element 10:Full :VolumeTag=000038L4
> Storage Element 11:Full :VolumeTag=000035L4
> Storage Element 12:Full :VolumeTag=000032L4
> Storage Element 13:Full :VolumeTag=000030L4
> Storage Element 14:Full :VolumeTag=000039L4
> Storage Element 15:Full :VolumeTag=000036L4
> Storage Element 16:Full :VolumeTag=000033L4
> Storage Element 17:Full :VolumeTag=000028L4
> Storage Element 18:Full :VolumeTag=000040L4
> Storage Element 19:Full :VolumeTag=000037L4
> Storage Element 20:Full :VolumeTag=000034L4
> Storage Element 21:Full :VolumeTag=000005L4
> Storage Element 22:Full :VolumeTag=000002L4
> Storage Element 23:Full :VolumeTag=000018L4
> Storage Element 24:Full :VolumeTag=000015L4
> Storage Element 25:Full :VolumeTag=000004L4
> Storage Element 26:Full :VolumeTag=000020L4
> Storage Element 27:Full :VolumeTag=000017L4
> Storage Element 28:Full :VolumeTag=000014L4
> Storage Element 29:Full :VolumeTag=000003L4
> Storage Element 30:Full :VolumeTag=000019L4
> Storage Element 31:Full :VolumeTag=000016L4
> Storage Element 32:Full :VolumeTag=000001L4
> Storage Element 33:Full :VolumeTag=000027L4
> Storage Element 34:Full :VolumeTag=000025L4
> Storage Element 35:Full :VolumeTag=000021L4
> Storage Element 36:Full :VolumeTag=000008L4
> Storage Element 37:Full :VolumeTag=000026L4
> Storage Element 38:Full :VolumeTag=000024L4
> Storage Element 39:Full :VolumeTag=000010L4
> Storage Element 40:Full :VolumeTag=000007L4
> Storage Element 41:Full :VolumeTag=000022L4
> Storage Element 42:Full :VolumeTag=000023L4
> Storage Element 43:Full :VolumeTag=000009L4
> Storage Element 44:Full :VolumeTag=000006L4
> Storage Element 45 IMPORT/EXPORT:Full :VolumeTag=000013L4
> Storage Element 46 IMPORT/EXPORT:Full :VolumeTag=000012L4
> Storage Element 47 IMPORT/EXPORT:Full :VolumeTag=000011L4
>
>
> Any idea ?
>
First off do not use st0 if you can use nst0.
Also you probably will need to modify your mtx-changer.sh script. The
reason is your OS is not waiting for your changer to actually load the
tape. I can see that from the log. The time between start of load and
failure was 0 minutes...
Look at the comments on this script and consult the list archives for
this problem. I know this problem comes up many times a year for
different changers.
John
------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|