On Sat, Nov 7, 2009 at 4:39 PM, Eduardo Sieber <sieber AT gmail DOT com> wrote:
> 00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller
> (rev 02) (prog-if 8a [Master SecP PriP])
>     Subsystem: Dell Device 0167
>     Flags: bus master, 66MHz, medium devsel, latency 0
>     I/O ports at 01f0 [size=8]
>     I/O ports at 03f4 [size=1]
>     I/O ports at 0170 [size=8]
>     I/O ports at 0374 [size=1]
>     I/O ports at fea0 [size=16]
>     Kernel driver in use: ata_piix
>     Kernel modules: ata_piix
>
>
> I think if the problem is in kernel, why in the past it works well?
> Maybe I Should try in a older kernel?
>

Since it is an Intel SATA controller I would not think their driver is
bad (Promise, SIL ... that would be a different story). Although this
is very suspicious that both devices on the SATA card are having
errors. If you have any SATA cards available I would try 1 on the tape
drive.

John

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users