Hello bacula-users,
I'm working on a setup of a Dell Server (PowerEdge R710) with a nice
SAS-controller hooked up to a PowerVault 124T LTO4 (SAS-interface).
I though have problems using mtx to access the autochanger (more to that
later).
This is what dmesg contains after booting (module loaded phase):
--- cut ---
[ 23.435737] scsi1 : ioc0: LSISAS1068 B0, FwRev=000a3300h, Ports=1,
MaxQ=366, IRQ=1272
[ 23.467843] scsi 1:0:0:0: Sequential-Access QUANTUM ULTRIUM 4
2170 PQ: 0 ANSI: 5
[ 23.493664] scsi 1:0:0:1: Medium Changer DELL PV-124T
0063 PQ: 0 ANSI: 2
--- cut ---
Here are the devices listed (lsscsi):
--- cut ---
[1:0:0:0] tape QUANTUM ULTRIUM 4 2170 /dev/st0
[1:0:0:1] mediumx DELL PV-124T 0063 /dev/sch0
--- cut ---
Now to the problem itself.
The autochanger doesn't seem to be suppored by mtx which is the base of
bacula's mtx-changer right?
--- cut ---
mtx -f /dev/sch0
/dev/sch0 is not an sg device, or old sg driver
--- cut ---
- Anyone here having an 147T with LTO4 and SAS running?
- Did I do anything wrong?
- Is such new SAS controller stuff just not supported?
--
Christian Rohmann
Content Delivery Server u. Dienste
Network Engineering & Design
NETCOLOGNE Gesellschaft für Telekommunikation mbH
Am Coloneum 9 | 50829 Köln
Tel: 0221 2222-5751 | Fax: 0221 2222-75751
http://www.netcologne.de
Geschäftsführer:
Werner Hanf
Dipl.-Ing. Karl-Heinz Zankel
HRB 25580, AG Köln
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
