Hi,
We're using Bacual v2.2.5 on Centos 4.7.
After a power cut which affected only our LTO4 drive (server on UPS)
none of our tapes are mounting properly. The output is as follows:
*mount LTO4
block.c:995 Read error on fd=5 at file:blk 0:0 on device "LTO4"
(/dev/st0). ERR=Input/output error.
block.c:995 Read error on fd=5 at file:blk 0:0 on device "LTO4"
(/dev/st0). ERR=Input/output error.
3902 Cannot mount Volume on Storage Device "LTO4" (/dev/st0) because:
Requested Volume "" on "LTO4" (/dev/st0) is not a Bacula labeled Volume,
because: ERR=block.c:995 Read error on fd=5 at file:blk 0:0 on device
"LTO4" (/dev/st0). ERR=Input/output error.
3905 Device "LTO4" (/dev/st0) open but no Bacula volume is mounted.
If this is not a blank tape, try unmounting and remounting the Volume.
Unmounting and re-mounting gives the same message.
Any advice or thoughts on what is happening here are appreciated!
Thanks,
Kris
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|