Hello,
I'm working on setting up Bacula 2.4.2 with the current version of
vchanger 0.8.2 from Sourceforge, using USB drives on CentOS 5.2.
Everything is going pretty much as described in the vchanger HowTo,
however "label barcodes" fails. the following is from console in BAT,
after attaching USB drive:
update slots
Select Storage resource (1-2): Connecting to Storage daemon usbbcla1 at
p-plover:9103 ...
3306 Issuing autochanger "slots" command.
Device "usbchanger" has 9 slots.
Connecting to Storage daemon usbbcla1 at p-plover:9103 ...
3306 Issuing autochanger "list" command.
Volume "usbbcla1_0001_0001" not found in catalog. Slot=1 InChanger set
to zero.
Volume "usbbcla1_0001_0002" not found in catalog. Slot=2 InChanger set
to zero.
...................
Volume "usbbcla1_0001_0008" not found in catalog. Slot=8 InChanger set
to zero.
Volume "usbbcla1_0001_0009" not found in catalog. Slot=9 InChanger set
to zero.
label barcodes
Connecting to Storage daemon usbbcla1 at p-plover:9103 ...
Sending label command for Volume "usbbcla1_0001_0001" Slot 1 ...
3301 Issuing autochanger "loaded? drive 0" command.
3302 Autochanger "loaded? drive 0", result: nothing loaded.
3304 Issuing autochanger "load slot 1, drive 0" command.
3305 Autochanger "load slot 1, drive 0", status is OK.
3000 OK label. VolBytes=221 DVD=0 Volume="usbbcla1_0001_0001"
Device="usbchanger-drive-0" (/var/lib/bacula/usbbcla1/drive0)
Catalog record for Volume "usbbcla1_0001_0001", Slot 1 successfully
created.
Sending label command for Volume "usbbcla1_0001_0002" Slot 2 ...
3307 Issuing autochanger "unload slot 1, drive 0" command.
3304 Issuing autochanger "load slot 2, drive 0" command.
3305 Autochanger "load slot 2, drive 0", status is OK.
3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001"
Label command failed for Volume usbbcla1_0001_0002.
Sending label command for Volume "usbbcla1_0001_0003" Slot 3 ...
..........
3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001"
Label command failed for Volume usbbcla1_0001_0008.
Sending label command for Volume "usbbcla1_0001_0009" Slot 9 ...
3307 Issuing autochanger "unload slot 8, drive 0" command.
3304 Issuing autochanger "load slot 9, drive 0" command.
3305 Autochanger "load slot 9, drive 0", status is OK.
3920 Cannot label Volume because it is already labeled: "usbbcla1_0001_0001"
Label command failed for Volume usbbcla1_0001_0009.
I tried running a job just to see what would happen. usbbcla1_0001_0001
filled successfully and then bacula asked for a new volume but said no
volumes could be found. Bacula seems to have labeled the first volume in
"slot 1" of the "magazine" successfully. But every attempt to label the
next volume in the next "slot" failed saying the first volume is already
labeled.
Any thoughts as to what could be going wrong here are greatly
appreciated! Thanks!
--
Thomas E. Plancon
CAD/IS Manager
B K A Architects, Inc.
142 Crescent Street
Brockton, MA 02302
tel: 508 . 583 . 5603 ext 313
fax: 508 . 584 . 2914
www.bkaarchitects.com <http://www.bkaarchs.com/>
------------------------------------------------------------------------------
Stay on top of everything new and different, both inside and
around Java (TM) technology - register by April 22, and save
$200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco.
300 plus technical and hands-on sessions. Register today.
Use priority code J9JMT32. http://p.sf.net/sfu/p
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
