On Fri, Feb 20, 2009 at 9:37 PM, Doug Sampson <dougs AT dawnsign DOT com> wrote:
>> > Found a few ways to create a static-fd (i think)
>> >
>> > run make configure in /usr/ports/sysutils/bacula-client
>> > write down (copy) the configure command with all the argument from
>> > config.log in the work/bacula-2.4.4 dir
>> > run make clean in /usr/ports/sysutils/bacula-client
>> > now run make extract, make path and cd into work/bacula-2.4.4
>>
>> Make path doesn't work.
>>
>> # corvus-root@/usr/ports/sysutils/bacula-client: make path
>> # make: don't know how to make path. Stop
>> # corvus-root@/usr/ports/sysutils/bacula-client:
>>
>> > and run the
>> > copied configure command with all the arguments and add
>> > --enable-static-fd
>> > to the line
>> > run make and a static-bacula-fd is in src/filed directory.
>> >
>> > run make in /usr/ports/sysutils/bacula-client
>> > cd into  work/bacula-2.4.4/src/filed and run make static-bacula-fd
>> >
>> > ldd static-bacula-fd
>> > static-bacula-fd:
>> >         libintl.so.8 => /usr/local/lib/libintl.so.8 (0x281e3000)
>> >         libiconv.so.3 => /usr/local/lib/libiconv.so.3 (0x281ec000)
>> >
>> >
>> > don't know if it will work dont have the resources to try it
>> > right now.
>
> I went ahead with the next few commands even though the 'make path' command
> failed (see above). I cd'ed into work/bacula-2.4.4 and executed the
> configure command along with --enable-static-fd. It completed and I ran the
> next command 'make' and it failed. Last few lines of error message as
> follows:
>
>
> ==== Make of lib is good ====
>
> ==>Entering directory
> /usr/ports/sysutils/bacula-client/work/bacula-2.4.4/src/findlib
> Compiling find.c
> Compiling match.c
> Compiling find_one.c
> Compiling attribs.c
> Compiling create_file.c
> Compiling bfile.c
> Compiling drivetype.c
> Compiling enable_priv.c
> Compiling fstype.c
> Compiling makepath.c
> Compiling save-cwd.c
> Making libfind.a ...
> /usr/bin/ar cr libfind.a find.o match.o find_one.o attribs.o create_file.o
> bfile.o drivetype.o enable_priv.o fstype.o makepath.o save-cwd.o
> ranlib libfind.a
> ==== Make of findlib is good ====
>
> ==>Entering directory
> /usr/ports/sysutils/bacula-client/work/bacula-2.4.4/src/filed
> Compiling filed.c
> Compiling authenticate.c
> Compiling acl.c
> Compiling backup.c
> Compiling estimate.c
> Compiling filed_conf.c
> Compiling heartbeat.c
> Compiling job.c
> Compiling pythonfd.c
> Compiling restore.c
> Compiling status.c
> Compiling verify.c
> Compiling verify_vol.c
> Linking bacula-fd ...
> /usr/bin/g++   -L../lib -L../findlib -o bacula-fd filed.o authenticate.o
> acl.o backup.o estimate.o  filed_conf.o heartbeat.o job.o pythonfd.o
> restore.o status.o verify.o verify_vol.o   -lz -lfind -lbac -lm  -lpthread
> -lwrap /usr/local/lib/libintl.so -L/usr/local/lib /usr/local/lib/libiconv.so
> -Wl,-rpath -Wl,/usr/local/lib
> /usr/bin/g++   -static -L../lib -L../findlib -o static-bacula-fd filed.o
> authenticate.o acl.o backup.o estimate.o  filed_conf.o heartbeat.o job.o
> pythonfd.o  restore.o status.o verify.o verify_vol.o   -lz -lfind -lbac -lm
> -lpthread   -lwrap /usr/local/lib/libintl.so -L/usr/local/lib
> /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib
> strip static-bacula-fd
> ==== Make of filed is good ====
>
> ==>Entering directory
> /usr/ports/sysutils/bacula-client/work/bacula-2.4.4/src/console
> Compiling console.c
> console.c:709:22: error: readline.h: No such file or directory
> console.c:710:21: error: history.h: No such file or directory
> console.c: In function 'int get_cmd(FILE*, const char*, BSOCK*, int)':
> console.c:718: error: 'rl_catch_signals' was not declared in this scope
> console.c:719: error: 'readline' was not declared in this scope
> console.c:727: error: 'add_history' was not declared in this scope
> *** Error code 1
>
> Stop in /usr/ports/sysutils/bacula-client/work/bacula-2.4.4/src/console.
>
>
>  ====== Error in
> /usr/ports/sysutils/bacula-client/work/bacula-2.4.4/src/console ======
>
>
> ==>Entering directory
> /usr/ports/sysutils/bacula-client/work/bacula-2.4.4/manpages
> corvus-root@/usr/ports/sysutils/bacula-client/work/bacula-2.4.4:
>
>
>
>
> What then? Was this because of the failed 'make path' command?


It's 'make patch' but adding the proper CONFIGURE_ARGS environment
variable as Dan stated would be the best way to go. Example for
csh/tcsh:

cd /usr/ports/sysutils/bacula-client
env CONFIGURE_ARGS+=--enable-static-fd make

Or make the option persistent by adding into /etc/make.conf the following lines:

.if $(.CURDIR:M*/sysutils/bacula-client) || \
    $(.CURDIR:M*/sysutils/bacula-client)
CONFIGURE_ARGS+=--enable-static-fd
.endif

Regards,
Panagiotis

------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users