On Tue, Dec 23, 2008 at 04:36:00PM -0800, Conor Edberg wrote:
>
> I saw some mention of these past problems during my research, so I 
> attempted to rule out network issues.  In my case, the FD, SD, and dir are 
> all on the same machine, so I assume the problem isn't switches or cabling.
>
> The machine is a Sun x4100m2, with 2 Intel Pro 1000 (e1000g driver) and 2 
> Nvidia (nge driver) interfaces, and I've tried using each model as the 
> active interface.  I've also tried using localhost/127.0.0.1 versus the 
> FQDN in all the config files.  I can't totally rule out a driver problem, 
> but I can at least say it applies to 2 different drivers.  I've seen this 
> problem both on Bacula 2.4.2 and 2.5.16 with almost default configs, 
> definitely no networking parameter changes.

I finally managed to grab a truss during one of these failures.  It's
fairly large so I've uploaded it to our mirror.  Hopefully this will
help reveal something.

http://mirrors.omniti.com/bacula/bacula.truss

Thanks,

-- 
Jason Dixon
OmniTI Computer Consulting, Inc.
jdixon AT omniti DOT com
443.325.1357 x.241

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users