I’ve got some problems at using the second
drive.
Why is the Client2 waiting on max Storage Jobs
, instead of using the second drive ( it’s a separate pool ! )
I ‘ve read many post, and I think I’ve
defined the proper resources, and drive-2 is working with mt and mtx
… have I missed something ?
In bconsole:
*status director :
……………………………………….
Running Jobs:
JobId Level
Name
Status
======================================================================
94 Full
BackupClient1.2008-12-17_16.15.30 is running
95 Increme
BackupCLlient2.2008-12-17_16.15.31 is waiting on max Storage jobs
96 Full
BackupClient3-12-17_16.15.32 is waiting on max Storage jobs
…………………………….
*status storage
……………
Device "Drive-1" (/dev/nst0) is mounted
with:
Volume: 000050
Pool: Monthly
Media type: SDLT-320
Slot 1 is loaded in drive 0.
Total Bytes=21,919,371,264
Blocks=339,771 Bytes/block=64,512
Positioned at File=41 Block=0
Device "Drive-2" (/dev/nst1) is not open.
Drive 1 status unknown.
……………..
My config, in bacula-dir.conf,
Director {
……
Maximum Concurrent Jobs = 10
……
}
JobDefs {
…….
Prefer Mounted Volumes = no
…….
Incremental Backup Pool = Daily
Differential Backup Pool = Daily
Full Backup Pool = Monthly
……….
}
In bacula-sd.conf
Storage {
………..
Maximum Concurrent Jobs = 20
………..
}
Thanks