Hi all,
I am new to bacula and try to get it running with an autochanger.
If I try the autochanger test, the system stops working from time to
time....
Sometimes it is working and stops later.
Can someone give me a hint what could be wrong?
Thanks,
Stefan
Here are the error messages:
Output1:
BACKUP3:/etc/bacula# btape -c /etc/bacula/bacula-sd.conf /dev/nst0
Tape block granularity is 1024 bytes.
btape: butil.c:285 Using device: "/dev/nst0" for writing./sg4 unload 1
/dev/nst0
29-Sep 12:08 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
29-Sep 12:08 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
29-Sep 12:08 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
29-Sep 12:08 btape JobId 0: 3302 Autochanger "loaded? drive 0", result is
Slot 2.
btape: btape.c:372 open device "Drive1" (/dev/nst0): OK
*test
=== Write, rewind, and re-read test ===his error or the Autochanger will not
work
I'm going to write 1000 records and an EOF
then write 1000 records and an EOF, then rewind,
and re-read the data to verify that it is correct.
This is an *essential* feature ...
btape: btape.c:831 Wrote 1000 blocks of 64412 bytes.
btape: btape.c:505 Wrote 1 EOF to "Drive1" (/dev/nst0)
btape: btape.c:847 Wrote 1000 blocks of 64412 bytes.
btape: btape.c:505 Wrote 1 EOF to "Drive1" (/dev/nst0)
btape: btape.c:856 Rewind OK.
1000 blocks re-read correctly.
Got EOF on tape.
Output2:
.
.
.
btape: btape.c:1354 Now forward spacing 1 more file.
We should be in file 5. I am at file 5. This is correct!
=== End Forward space files test ===
Ah, I see you have an autochanger configured.
To test the autochanger you must have a blank tape
that I can write on in Slot 1.
Do you wish to continue with the Autochanger test? (y/n): y
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
Nothing loaded in the drive. OK.
3303 Issuing autochanger "load 1 0" command.
3993 Bad autochanger command: /etc/bacula/scripts/mtx-changer /dev/sg4 load
1 /dev/nst0 0
3993 result="Drive 0 Full (Storage Element 1 loaded)
": ERR=Child exited with code 1
You must correct this error or the Autochanger will not work.
--
View this message in context:
http://www.nabble.com/Autochanger-is-not-working-tp19721322p19721322.html
Sent from the Bacula - Users mailing list archive at Nabble.com.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
