I'm really having problems like the below dump which killed a backup that was
19 hours into a 24+ hour run. Granted my versions are 2.4.0, so if these are
fixed, then I'll happily upgrade, but if not:
1. Do I need to do something other than "update slots" when I remove tapes
from my loader? Why does Bacula insist on trying to pull an older tape out the
loader? This is a tape that hasn't been in the loader for a month at least.
2. Can Bacula not be written with error checking that covers cases like this.
IOW, why does it crash when it discovers the loader is not set up the way it
was?
16-Sep 22:09 hippo-dir JobId 7186: Start Backup JobId 7186,
Job=cichlid-users.2008-09-16_22.09.38
16-Sep 22:09 hippo-dir JobId 7186: Using Device "Drive-1"
17-Sep 07:09 hippo-sd JobId 7186: End of Volume "000024" at 852:11602 on device
"Drive-1" (/dev/nst0). Write of 64512 bytes got -1.
17-Sep 07:09 hippo-sd JobId 7186: Re-read of last block succeeded.
17-Sep 07:09 hippo-sd JobId 7186: End of medium on Volume "000024"
Bytes=752,021,609,472 Blocks=11,657,080 at 17-Sep-2008 07:09.
17-Sep 07:09 hippo-sd JobId 7186: 3307 Issuing autochanger "unload slot 6,
drive 0" command.
17-Sep 07:10 hippo-dir JobId 7186: Recycled volume "000023"
17-Sep 07:10 hippo-sd JobId 7186: 3301 Issuing autochanger "loaded? drive 0"
command.
17-Sep 07:10 hippo-sd JobId 7186: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
17-Sep 07:10 hippo-sd JobId 7186: 3304 Issuing autochanger "load slot 5, drive
0" command.
17-Sep 07:10 hippo-sd JobId 7186: 3305 Autochanger "load slot 5, drive 0",
status is OK.
17-Sep 07:10 hippo-sd JobId 7186: Recycled volume "000023" on device "Drive-1"
(/dev/nst0), all previous data lost.
17-Sep 07:10 hippo-sd JobId 7186: New volume "000023" mounted on device
"Drive-1" (/dev/nst0) at 17-Sep-2008 07:10.
17-Sep 17:39 hippo-sd JobId 7186: End of Volume "000023" at 424:7840 on device
"Drive-1" (/dev/nst0). Write of 64512 bytes got -1.
17-Sep 17:39 hippo-sd JobId 7186: Re-read of last block succeeded.
17-Sep 17:39 hippo-sd JobId 7186: End of medium on Volume "000023"
Bytes=424,478,638,080 Blocks=6,579,839 at 17-Sep-2008 17:39.
17-Sep 17:39 hippo-sd JobId 7186: 3307 Issuing autochanger "unload slot 5,
drive 0" command.
17-Sep 17:39 hippo-sd JobId 7186: Invalid slot=0 defined in catalog for Volume
"000034" on "Drive-1" (/dev/nst0). Manual load may be required.
17-Sep 17:39 hippo-sd JobId 7186: 3301 Issuing autochanger "loaded? drive 0"
command.
17-Sep 17:39 hippo-sd JobId 7186: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
17-Sep 17:39 hippo-sd JobId 7186: 3301 Issuing autochanger "loaded? drive 0"
command.
17-Sep 17:39 hippo-sd JobId 7186: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
17-Sep 17:39 hippo-sd JobId 7186: Error: Could not open device "Drive-1"
(/dev/nst0): ERR=dev.c:432 Unable to open device "Drive-1" (/dev/nst0): ERR=No
medium found
17-Sep 17:39 hippo-sd JobId 7186: Job write elapsed time = 19:29:45, Transfer
rate = 11.23 M bytes/second
17-Sep 17:36 cichlid-fd: cichlid-users.2008-09-16_22.09.38 Fatal error:
backup.c:892 Network send error to SD. ERR=Broken pipe
17-Sep 17:40 hippo-dir JobId 7186: Error: Bacula hippo-dir 2.4.0 (04Jun08):
17-Sep-2008 17:40:01
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
