I am having some problems with bacula and any help would be appreciated.
I am running, Version 2.4.1, on a CentOS 5.2 Dell 2900, with a TANDBERG
Model: TS400 (LTO2)
Firstly I get the following error from bacula ...
06-Aug 01:05 vic-dir JobId 109: Start Backup JobId 109,
Job=rimu.2008-08-06_01.05.33
06-Aug 01:05 vic-dir JobId 109: Using Device "TS400"
06-Aug 01:05 vic-sd JobId 109: Wrote label to prelabeled Volume
"v-monthly-001" on device "TS400" (/dev/nst0)
06-Aug 01:59 vic-sd JobId 109: Error: block.c:568 Write error at
24:12836 on device "TS400" (/dev/nst0). ERR=Input/output error.
06-Aug 01:59 vic-sd JobId 109: Error: Error writing final EOF to tape.
This Volume may not be readable.
dev.c:1681 ioctl MTWEOF error on "TS400" (/dev/nst0). ERR=Input/output
error.
06-Aug 01:59 vic-sd JobId 109: End of medium on Volume "v-monthly-001"
Bytes=24,826,540,032 Blocks=384,835 at 06-Aug-2008 01:59.
06-Aug 09:40 rimu-fd JobId 109: Fatal error: backup.c:892 Network send
error to SD. ERR=Input/output error
06-Aug 09:40 vic-sd JobId 109: Job rimu.2008-08-06_01.05.33 marked to be
canceled.
The tape isn't full, it was brand new as of last night when it was
inserted, I also inserted a cleaning tape before the new tape
In /var/log/messages, at the same time bacula gives errors I get ...
Aug 6 01:59:29 rimu kernel: st0: Current: sense key: Medium Error
Aug 6 01:59:29 rimu kernel: Add. Sense: Excessive write errors
Aug 6 01:59:29 rimu kernel:
Aug 6 01:59:29 rimu kernel: Info fld=0xfc00
Aug 6 01:59:29 rimu kernel: st0: Current: sense key: Medium Error
Aug 6 01:59:29 rimu kernel: Add. Sense: Excessive write errors
Aug 6 01:59:29 rimu kernel:
Aug 6 01:59:29 rimu kernel: Info fld=0x1
And a bit later ......
Aug 6 05:52:50 rimu kernel: mptscsih: ioc0: attempting task abort!
(sc=f4479ac0)
Aug 6 05:52:50 rimu kernel: st 2:0:6:0:
Aug 6 05:52:50 rimu kernel: command: Rezero Unit/Rewind: 01 00
00 00 00 00
Aug 6 05:52:50 rimu kernel: mptscsih: ioc0: task abort: FAILED
(sc=f4479ac0)
Aug 6 05:52:50 rimu kernel: mptscsih: ioc0: attempting target reset!
(sc=f4479ac0)
Aug 6 05:52:50 rimu kernel: st 2:0:6:0:
Aug 6 05:52:50 rimu kernel: command: Rezero Unit/Rewind: 01 00
00 00 00 00
Aug 6 05:52:51 rimu kernel: mptscsih: ioc0: target reset: SUCCESS
(sc=f4479ac0)
Aug 6 05:52:51 rimu kernel: st0: Current: sense key: Not Ready
Aug 6 05:52:51 rimu kernel: Add. Sense: Logical unit not ready,
cause not reportable
Aug 6 05:52:51 rimu kernel:
Aug 6 05:53:01 rimu kernel: mptscsih: ioc0: attempting task abort!
(sc=f4479ac0)
Aug 6 05:53:01 rimu kernel: st 2:0:6:0:
Aug 6 05:53:01 rimu kernel: command: Prevent/Allow Medium
Removal: 1e 00 00 00 01 00
Aug 6 05:53:01 rimu kernel: mptscsih: ioc0: task abort: FAILED
(sc=f4479ac0)
Aug 6 05:53:01 rimu kernel: mptscsih: ioc0: attempting target reset!
(sc=f4479ac0)
Aug 6 05:53:01 rimu kernel: st 2:0:6:0:
When running the status command on the storage daemon it hangs. And then
when stopping or killing bacula I get defunct bacula-sd process which
locks the tape drive.
bacula 3592 1 0 Jul30 ? 00:10:42 [bacula-sd] <defunct>
I then have to reboot the server to get the tape + bacula to work again.
We also have an identical setup at another site, the same thing was
occurring until I upgraded to 2.4.1. But this server with 2.4.1 is still
having the problem, every couple of weeks.
Cheers,
Daniel
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
