nobody can help me?
A question, if I run the command "status then 2 and then 2" I see:
Connecting to Storage daemon spectra at slc02.sociale.it:9103
slc02-sd Version: 2.4.0 (04 June 2008) i686-redhat-linux-gnu redhat
Daemon started 26-Jul-08 10:13, 4 Jobs run since started.
Heap: heap=454,656 smbytes=287,807 max_bytes=319,128 bufs=119 max_bufs=127
Sizes: boffset_t=8 size_t=4 int32_t=4 int64_t=8
Running Jobs:
Backup Job siav5.2008-07-25_23.05.59 waiting for Client connection.
Writing: Full Backup job siav5 JobId=444 Volume="Full-0042"
pool="Full-Pool" device="Drive-0" (/dev/st0)
spooling=0 despooling=0 despool_wait=0
Files=0 Bytes=0 Bytes/sec=0
FDSocket closed
====
Jobs waiting to reserve a drive:
====
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
===================================================================
424 Full 0 0 Error 25-Jul-08 11:01 mysqlsistemi
425 Full 0 0 Error 25-Jul-08 11:01 portali
426 Full 0 0 Error 25-Jul-08 11:01 flussisias
427 Full 0 0 Error 25-Jul-08 11:02 flussixml
428 Full 0 0 Cancel 25-Jul-08 11:23 siav5
432 Full 0 0 Cancel 25-Jul-08 12:47 BackupCatalog
440 Full 0 0 Error 26-Jul-08 10:13 mysqlsistemi
441 Full 0 0 Error 26-Jul-08 10:14 portali
442 Full 0 0 Error 26-Jul-08 10:14 flussisias
443 Full 0 0 Error 26-Jul-08 10:14 flussixml
====
Device status:
Autochanger "spectra" with devices:
"Drive-0" (/dev/st0)
Device "FileStorage" (/opt/file) is not open.
Device "Drive-0" (/dev/st0) is not open.
Drive 0 status unknown.
====
In Use Volume status:
Full-0042 on device "Drive-0" (/dev/st0)
Reader=0 writers=0 devres=1 volinuse=1
====
====
Where does Bacula takes those JobId?
In the table Job of the DB Bacula a that JobId corresponds to an old job that
was completed regularly.
Ing. Stefano Elmopi
Gruppo Darco - Area ICT Sistemi
Via Ostiense 131/L Corpo B, 00154 Roma
cell. 3466147165
tel. 0657060500
email:stefano.elmopi AT sociale DOT it
Stefano Elmopi wrote:
>
> Hi,
>
> I have a strange problem !!
> I get e-mail control of the various jobs that are configured in this way:
>
> 22-Jul 23:05 slc02-dir JobId 385: No prior Full backup Job record found.
> 22-Jul 23:05 slc02-dir JobId 385: No prior or suitable Full backup found in
> catalog. Doing FULL backup.
> 22-Jul 23:05 slc02-dir JobId 385: Start Backup JobId 385,
> Job=sicuro.2008-07-22_23.05.13
> 22-Jul 23:05 slc02-sd JobId 385: 3307 Issuing autochanger "unload slot 39,
> drive 0" command.
> 22-Jul 23:06 slc02-dir JobId 385: Using Device "Drive-0"
> 22-Jul 23:06 slc02-sd JobId 385: Invalid slot=0 defined in catalog for Volume
> "Full-0040" on
> "Drive-0" (/dev/st0). Manual load may be required.
> 22-Jul 23:06 slc02-sd JobId 385: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 22-Jul 23:06 slc02-sd JobId 385: 3302 Autochanger "loaded? drive 0", result:
> nothing loaded.
> 22-Jul 23:06 slc02-sd JobId 385: 3301 Issuing autochanger "loaded? drive 0"
> command.
> 22-Jul 23:07 slc02-sd JobId 385: 3302 Autochanger "loaded? drive 0", result:
> nothing loaded.
> 22-Jul 23:07 sicuro: sicuro.2008-07-22_23.05.13 Fatal error: job.c:1811 Bad
> response to Append Data
> command. Wanted 3000 OK data
> , got 3903 Error append data
>
> 22-Jul 23:07 slc02-sd JobId 385: Error: Could not open device "Drive-0"
> (/dev/st0): ERR=dev.c:432
> Unable to open device "Drive-0" (/dev/st0): ERR=No medium found
>
> 22-Jul 23:07 slc02-sd JobId 385: Fatal error: Could not ready device
> "Drive-0" (/dev/st0) for append.
> 22-Jul 23:07 slc02-dir JobId 385: Error: Bacula slc02-dir 2.2.8 (26Jan08):
> 22-Jul-2008 23:07:02
> Build OS: i686-redhat-linux-gnu redhat
> JobId: 385
> Job: sicuro.2008-07-22_23.05.13
> Backup Level: Full (upgraded from Incremental)
> Client: "sicuro" 2.2.4 (14Sep07) i686-pc-linux-gnu,suse,9
> FileSet: "sicuro_fileset" 2008-04-09 23:05:00
> Pool: "Full-Pool" (From Job FullPool override)
> Storage: "spectra" (From Job resource)
> Scheduled time: 22-Jul-2008 23:05:00
> Start time: 22-Jul-2008 23:06:49
> End time: 22-Jul-2008 23:07:02
> Elapsed time: 13 secs
> Priority: 10
> FD Files Written: 0
> SD Files Written: 0
> FD Bytes Written: 0 (0 B)
> SD Bytes Written: 0 (0 B)
> Rate: 0.0 KB/s
> Software Compression: None
> VSS: no
> Storage Encryption: no
> Volume name(s):
> Volume Session Id: 2
> Volume Session Time: 1216718934
> Last Volume Bytes: 0 (0 B)
> Non-fatal FD errors: 0
> SD Errors: 0
> FD termination status: Error
> SD termination status: Error
> Termination: *** Backup Error ***
>
> the problem is that the version of Bacula is 2.8, the JobId is not in the
> catalog and the volume
> "Full-0040" does not exist.
> If I make the status of the tape, I see this:
>
> slc02-sd Version: 2.4.0 (04 June 2008) i686-redhat-linux-gnu redhat
> Daemon started 22-Jul-08 11:28, 6 Jobs run since started.
> Heap: heap=585,728 smbytes=423,797 max_bytes=423,907 bufs=153 max_bufs=155
> Sizes: boffset_t=8 size_t=4 int32_t=4 int64_t=8
>
> Running Jobs:
> Writing: Incremental Backup job sicuro JobId=2602 Volume=""
> pool="Inc-Pool" device="Drive-0" (/dev/st0)
> spooling=0 despooling=0 despool_wait=0
> Files=0 Bytes=0 Bytes/sec=0
> FDReadSeqNo=6 in_msg=6 out_msg=4 fd=4
> Writing: Full Backup job arianna JobId=390 Volume="Full-0040"
> pool="Full-Pool" device="Drive-0" (/dev/st0)
> spooling=0 despooling=0 despool_wait=0
> Files=0 Bytes=0 Bytes/sec=0
> FDSocket closed
> ====
>
> Jobs waiting to reserve a drive:
> 3608 JobId=390 wants Pool="Full-Pool" but have Pool="Inc-Pool" nreserve=1
> on drive "Drive-0"
> (/dev/st0).
> ====
>
> Terminated Jobs:
> JobId Level Files Bytes Status Finished Name
> ===================================================================
> 371 Full 0 0 Error 22-Jul-08 10:07 polis
> 372 Full 0 0 Cancel 22-Jul-08 10:08 contabilita
> 2600 Incr 115 480.8 M OK 22-Jul-08 10:34 elearning
> 384 Full 0 0 Cancel 22-Jul-08 11:22 BackupCatalog
> 2601 Full 69 622.9 G OK 22-Jul-08 16:20 oracle
> 385 Full 0 0 Error 22-Jul-08 23:07 sicuro
> 386 Full 0 0 Error 22-Jul-08 23:07 sia
> 387 Full 0 0 Error 22-Jul-08 23:07 polis
> 388 Full 0 0 Other 22-Jul-08 23:37 contabilita
> 389 Full 0 0 Error 22-Jul-08 23:37 elearning
> ====
>
> Device status:
> Autochanger "spectra" with devices:
> "Drive-0" (/dev/st0)
> Device "FileStorage" (/opt/file) is not open.
> Device "Drive-0" (/dev/st0) is not open.
> Device is BLOCKED waiting to create a volume for:
> Pool: Inc-Pool
> Media type: LTO-3
> Drive 0 status unknown.
> ====
>
> In Use Volume status:
> Full-0040 on device "Drive-0" (/dev/st0)
> Reader=0 writers=0 devres=1 volinuse=1
> ====
>
> 390 job does not exist in the catalogue while 2602 is what should be done.
> If I try to cancel the 390:
>
> *cancel JobId=390
> JobId 390 is not running. Use Job name to cancel inactive jobs.
>
> Bacula where you take the Id 390?
> I am desperate, someone help me knows?
> Thank you
>
>
>
>
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|