Hello,
Im new on this list and as you can imagine I need your help ;).
At the moment Im trying to get Bacula up and running. So I have buyed a new HP
Server and a HP Ultrium 480 TapeStreamer.
Now Im trying to install Bacula on my Debian Etch Server with the Standard .deb
Packages and I don´t get the TapeStreamer running.
See what happens
"root@Maschine:~# btape -c /etc/bacula/bacula-sd.conf /dev/st0 Tape block
granularity is 1024 bytes.
btape: butil.c:272 Using device: "/dev/st0" for writing.
btape: btape.c:338 open device "Ultrium480" (/dev/st0): OK *test
=== Write, rewind, and re-read test ===
I'm going to write 1000 records and an EOF then write 1000 records and an EOF,
then rewind, and re-read the data to verify that it is correct.
This is an *essential* feature ...
23-Jul 15:39 btape: btape Error: block.c:538 Write error at 0:1 on device
"Ultrium480" (/dev/st0). ERR=Eingabe-/Ausgabefehler."
Well Im not really sure if my Ultrium480 is /dev/st0 or /dev/nst0, but
dmesg | grep st0
st 0:0:3:0: Attached scsi tape st0
st0: try direct i/o: yes (alignment 512 B)
st0: Block limits 1 - 16777215 bytes.
st0: MTSETDRVBUFFER only allowed for root.
says so.
Here is my bacula-sd.conf. Hopefully you can help me setting up a new
LinuxService :).
best regards
Torben Klassen
--
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|