Hi Adam,
thx a lot. I checked my client.pl to clean all not needed lines, and
finally, it's just working :)
My main problem now is the speed of the backup 5.85 Mo actually, thats
weird (Hp2626 switchs 100Mb through vlans).
My last error was :
Backup aborted (Unknown module '/')
Thx a lot again
@++
G
my client.pl (windows Xp)
$Conf{XferMethod} = 'rsyncd';
$Conf{RsyncdUserName} = 'backuppc';
$Conf{RsyncdPasswd} = 'backuppc';
$Conf{ClientNameAlias} = 'XXX.XXX.XXX.XXX';
$Conf{BackupFilesOnly} = {
'*' => []
};
$Conf{BackupFilesExclude} = {
'*' => []
};
$Conf{RsyncShareName} = [
'docs'
];
Adam Goryachev a écrit :
> Gérald Becker wrote:
> > error log :
> > full backup started for directory docs
> > Connected to XXX.XXX.XXX.XXX:873, remote version 29
> > Negotiated protocol version 28
> > Connected to module docs
> > Sending args: --server --sender --numeric-ids --perms --owner --group
> -D --links --hard-links --times --block-size=2048 --recursive
> --ignore-times . .
> > Sent include: /c:
> > Sent include: /c:/docs
> > Sent exclude: /*
> > Sent exclude: /c:/*
> > Xfer PIDs are now 6500
> > create d 755 400/401 0 .
> > Done: 0 files, 0 bytes
> > Got fatal error during xfer (No files dumped for share docs)
> > Backup aborted (No files dumped for share docs)
> > Not saving this as a partial backup since it has fewer files than the
> prior one (got 0 and 0 files versus 0)
>
> > client.pl :
> > $Conf{XferMethod} = 'rsyncd';
> > $Conf{BackupFilesOnly} = {
> > '*' => [
> > 'c:/docs'
> > ]
> > };
>
> I would suggest you do not need this. On the client in the rsyncd.conf
> file you will specify that the module "docs" is the folder C:\docs, so
> when backuppc does a backup of the module docs, only that directory
> will be backed up anyway. So, delete this section.
> > $Conf{RsyncShareName} = [
> > 'docs'
> > ];
> > $Conf{RsyncdPasswd} = 'backuppc';
> > $Conf{RsyncdUserName} = 'backuppc';
> > $Conf{ClientNameAlias} = 'XXX.XXX.XXX.XXX';
> > $Conf{SmbShareName} = [
> > 'docs'
> > ];
> SmbShareName is not even relevant since you are using rsyncd not smb
> for your backups. Remove this line.
> > $Conf{BackupFilesExclude} = {
> > '/winnt/tmp' => [
> > ''
> > ]
> > };
> Again, remove this. You are saying for the module "/winnt/tmp" you
> want to exclude the file/dir called ''. I'm not sure what would happen
> if you really did have a matching module, but since you don't, just
> remove the whole thing. If you had a dir called c:\docs\temp that you
> wanted to exclude, it might look like this (I'm kinda guessing, so
> this might also be wrong, try with a simple config, and when it works,
> add the fancy stuff later)
>
> $Conf{BaackupFilesExclude} = {
> 'docs' => [ 'temp' ],
> };
>
> Hope that all helps.
>
> Regards,
> Adam
------------------------------------------------------------------------------
Stay on top of everything new and different, both inside and
around Java (TM) technology - register by April 22, and save
$200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco.
300 plus technical and hands-on sessions. Register today.
Use priority code J9JMT32. http://p.sf.net/sfu/p
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
------------------------------------------------------------------------------
Stay on top of everything new and different, both inside and
around Java (TM) technology - register by April 22, and save
$200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco.
300 plus technical and hands-on sessions. Register today.
Use priority code J9JMT32. http://p.sf.net/sfu/p
_______________________________________________
BackupPC-users mailing list
BackupPC-users AT lists.sourceforge DOT net
List: https://lists.sourceforge.net/lists/listinfo/backuppc-users
Wiki: http://backuppc.wiki.sourceforge.net
Project: http://backuppc.sourceforge.net/
|