RE: FAILED "No new tape."
2009-10-26 10:13:54
Thanks Jon and Dustin for your replies.
It seems to be a hardware issue. We have two identical tape drives so I'm just
doing some testing to see if I can narrow it down to the tape drive or the
cable.
Best regards,
Johan
-----Original Message-----
From: djmitche AT gmail DOT com [mailto:djmitche AT gmail DOT com] On Behalf Of
Dustin J. Mitchell
Sent: 25 October 2009 14:57
To: Johan Booysen
Cc: amanda-users AT amanda DOT org
Subject: Re: FAILED "No new tape."
On Sun, Oct 25, 2009 at 6:33 AM, Johan Booysen <johan AT matrix-data.co DOT uk>
wrote:
> I would really appreciate some advice on how to troubleshoot this problem.
1256320978.957231: taper: putresult: 18 NEW-TAPE
1256321083.042522: taper: putresult: 10 FAILED
It looks like the taper ran for about 105s before failing, so it
probably encountered an EIO or other tape error at that point. I
would guess this is a SCSI error, because the device doesn't seem to
recover after that -- all dumps fail immediately.
I would check kernel logs for info about the errors, and also try
using 'dd' to write to the drive.
Dustin
--
Open Source Storage Engineer
http://www.zmanda.com
|
|
|