On Thu, Feb 19, 2009 at 01:34:13PM -0500, Dustin J. Mitchell wrote:
> On Thu, Feb 19, 2009 at 10:03 AM, stan <stanb AT panix DOT com> wrote:
> > Any thoughts as to what might be going on here?
>
> >From the look of it, the taper begins writing a TAPESTART header
> (well, two -- one for each child device), then 11s later, fails and
> goes looking for a new tape. It finds a new tape, but driver says "no
> soup for you!"
>
> 1235054407.366438: taper: getcmd: NO-NEW-TAPE "runtapes volumes already
> written"
>
> and everything shuts down.
>
> The question is *why* the write to the device failed. I don't see any
> good clues in the logfile. What does
> amdevcheck DailyDump rait:{file:/vtapes/DailyDump/vtape5,tape:/dev/nst0}
> give you, now that the perl errors are resolved?
>
SUCCESS
I rebilt everything to live in the directories that I prefer, reinstalled
all the configs, and history files, and amstatus says:
AP0502:/dev/md/dsk/d0 1 0m failed to flush: runtapes
volumes already written (15:24:42)
I moved the old changer-debug file out fthe way, here is the new one:
arguments -> -info
Note: setting posteject to a default of "true"
Exit -> 5 25 1
arguments -> -slot current
Note: setting posteject to a default of "true"
Exit -> 5 rait:{file:/vtapes/DailyDump/vtape5,tape:/dev/nst0}
arguments -> -slot current
Note: setting posteject to a default of "true"
Exit -> 5 rait:{file:/vtapes/DailyDump/vtape5,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 6 rait:{file:/vtapes/DailyDump/vtape6,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 7 rait:{file:/vtapes/DailyDump/vtape7,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 8 rait:{file:/vtapes/DailyDump/vtape8,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 9 rait:{file:/vtapes/DailyDump/vtape9,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 10 rait:{file:/vtapes/DailyDump/vtape10,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 11 rait:{file:/vtapes/DailyDump/vtape11,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 12 rait:{file:/vtapes/DailyDump/vtape12,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 13 rait:{file:/vtapes/DailyDump/vtape13,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 14 rait:{file:/vtapes/DailyDump/vtape14,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 15 rait:{file:/vtapes/DailyDump/vtape15,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 16 rait:{file:/vtapes/DailyDump/vtape16,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 17 rait:{file:/vtapes/DailyDump/vtape17,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 18 rait:{file:/vtapes/DailyDump/vtape18,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 19 rait:{file:/vtapes/DailyDump/vtape19,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 20 rait:{file:/vtapes/DailyDump/vtape20,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 21 rait:{file:/vtapes/DailyDump/vtape21,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 22 rait:{file:/vtapes/DailyDump/vtape22,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 23 rait:{file:/vtapes/DailyDump/vtape23,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 24 rait:{file:/vtapes/DailyDump/vtape24,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 25 rait:{file:/vtapes/DailyDump/vtape25,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 1 rait:{file:/vtapes/DailyDump/vtape1,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 2 rait:{file:/vtapes/DailyDump/vtape2,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 3 rait:{file:/vtapes/DailyDump/vtape3,tape:/dev/nst0}
arguments -> -slot next
Note: setting posteject to a default of "true"
Exit -> 4 rait:{file:/vtapes/DailyDump/vtape4,tape:/dev/nst0}
arguments -> -slot current
Note: setting posteject to a default of "true"
Exit -> 4 rait:{file:/vtapes/DailyDump/vtape4,tape:/dev/nst0}
Do I need to add some more diagnostics?
--
One of the main causes of the fall of the roman empire was that, lacking
zero, they had no way to indicate successful termination of their C
programs.
|
