[Fwd: Re: Tape Autoloader]
2008-10-20 06:57:19
--- Begin Message ---
Hi Angelo,
Thanks for your reply.
I was using the Labels for Cleaning tapes, but now the labels for
Mondays tape - please find below.
1. amcheck
Amanda Tape Server Host Check
-----------------------------
Holding disk /var/tmp/amanda: 16113212 kB disk space available, using
2048000 kB as requested
Changer problem: mtx command (mtx) doesn't exist
changer problem: mtx command (mtx) doesn't exist (expecting a new
tape)
Server check took 0.052 seconds
Amanda Backup Client Hosts Check
--------------------------------
Client check: 1 host checked in 0.111 seconds, 0 problems found
(brought to you by Amanda 2.5.2)
amanda@backupserver:~$
2. No access to mtx
amanda@backupserver:~$ mtx -f /dev/sg2 status
cannot open SCSI device '/dev/sg2' - Permission denied
although path is set
amanda@backupserver:~$ more .profile
export PATH=/usr/sbin:/usr/libexec/amanda:/usr/bin:/bin:/usr/sbin
The new tapes are
root@backupserver:/etc/amanda/fullback# mtx -f /dev/sg2 status
Storage Changer /dev/sg2:1 Drives, 16 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Storage Element 1:Full :VolumeTag=MONDAY - 01
Storage Element 2:Full :VolumeTag=MONDAY - 02
Storage Element 3:Empty
Storage Element 4:Empty
Storage Element 5:Empty
Storage Element 6:Empty
Storage Element 7:Empty
Storage Element 8:Empty
Storage Element 9:Empty
Storage Element 10:Empty
Storage Element 11:Empty
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Empty
Amanda.conf is
runtapes 2
tpchanger "chg-zd-mtx"
changerfile "/var/lib/amanda/changer.conf"
changerdev "/dev/sg0"
tapetype LTO-4
tapedev "/dev/nst0"
labelstr "^MONDAY-0[1-2]*$"
amrecover_changer "chg-zd-mtx"
changer.conf
eject > 1 # Tapedrives need an eject command
sleep 10 # Seconds to wait until the tape gets ready
cleanmax 10
havebarcode 1
havereader=1
offline_before_unload=1
offlinestatus=1
OFFLINE_BEFORE_UNLOAD=1
Angelo Höngens wrote:
Prashant Ramhit wrote:
Hi All,
I have been using a LT04 Tape for backup. And now I received a new LT04
Quantum Superloader.
I am trying to get it working but it is not.
My config is as follows,
amanda.conf
runtapes 2
tpchanger "chg-zd-mtx"
changerfile "/var/lib/amanda/changer.conf"
changerdev "/dev/sg0"
tapetype LTO-4
tapedev "/dev/nst0"
labelstr "^CLN14[1-2]L2*$"
amrecover_changer "chg-zd-mtx"
changer.conf
eject > 1 # Tapedrives need an eject command
sleep 10 # Seconds to wait until the tape gets ready
cleanmax 10
havebarcode 1
havereader=1
offline_before_unload=1
offlinestatus=1
OFFLINE_BEFORE_UNLOAD=1
root@backupserver:/etc/amanda/fullback# mtx -f /dev/sg2 status
Storage Changer /dev/sg2:1 Drives, 16 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Storage Element 1:Full :VolumeTag=CLN141L2
Storage Element 2:Full :VolumeTag=CLN142L2
Storage Element 3:Empty
Storage Element 4:Empty
Storage Element 5:Empty
Storage Element 6:Empty
Storage Element 7:Empty
Storage Element 8:Empty
Storage Element 9:Empty
Storage Element 10:Empty
Storage Element 11:Empty
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Empty
Anyone has an idea, what is wrong.
Thanks
Prashant
Prashant,
What exactly does not work?
And you do know you're probably working with only cleaning tapes?
Usually the cleaning tapes get a label 'CLN'. Please make sure there
are 'normal' tapes in the drive..
Angelo.
--- End Message ---
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Fwd: Re: Tape Autoloader],
Prashant Ramhit <=
|
|
|