Andre Brandt wrote:
> Sure :)
> 
> Logfile:
> 
> DISK amflush test.mynet /data
> DISK amflush srv1.mynet /data
> DISK amflush srv1.mynet /etc
> DISK amflush srv1.mynet /var
> START amflush date 20080807082315
> START driver date 20080807082315
> STATS driver startup time 0.012
> START taper datestamp 20080807082315 label DailySet1-001 tape 0
> SUCCESS taper test.mynet /data 20080729 1 [sec 6.938 kb 2944 kps 424.3 {wr: 
> writers 92 rdwait 0.000 wrwait 0.036 filemark 6.901}]
> SUCCESS taper srv1.mynet /data 20080729 2 [sec 34.533 kb 641856 kps 18586.6 
> {wr: writers 20058 rdwait 0.743 wrwait 29.223 filemark 4.506}]
> SUCCESS taper srv1.mynet /var 20080729 2 [sec 27.319 kb 517664 kps 18948.8 
> {wr: writers 16177 rdwait 0.691 wrwait 24.682 filemark 1.895}]
> SUCCESS taper srv1.mynet /etc 20080729 1 [sec 1.909 kb 96 kps 50.3 {wr:
> writers 3 rdwait 0.000 wrwait 0.004 filemark 1.905}]
> INFO taper tape DailySet1-001 kb 1162560 fm 4 [OK]
> 
> 
> 
> Report mail:
> 
> *** THE DUMPS DID NOT FINISH PROPERLY!
> 
> The dumps were flushed to tape DailySet1-001.
> The next tape Amanda expects to use is: DailySet1-002.
> 
> 
> STATISTICS:
>                           Total       Full      Incr.
>                         --------   --------   --------
> Estimate Time (hrs:min)    0:00
> Run Time (hrs:min)         0:01
> Dump Time (hrs:min)        0:00       0:00       0:00
> Output Size (meg)           0.0        0.0        0.0
> Original Size (meg)         0.0        0.0        0.0
> Avg Compressed Size (%)     --         --         -- 
> Filesystems Dumped            0          0          0
> Avg Dump Rate (k/s)         --         --         -- 
> 
> Tape Time (hrs:min)        0:01       0:00       0:01
> Tape Size (meg)          1135.3        0.0     1135.3
> Tape Used (%)               0.6        0.0        0.6   (level:#disks ...)
> Filesystems Taped             4          0          4   (1:2 2:2)
> 
> Chunks Taped                  0          0          0
> Avg Tp Write Rate (k/s) 16443.8        --     16443.8
> 
> USAGE BY TAPE:
>   Label                      Time      Size      %    Nb    Nc
>   DailySet1-001       0:01  1162560k    0.6     4     0
> 
> 
> NOTES:
>   taper: tape DailySet1-001 kb 1162560 fm 4 [OK]
> 
> 
> DUMP SUMMARY:
>                                        DUMPER STATS               TAPER STATS 
> HOSTNAME     DISK        L ORIG-kB  OUT-kB  COMP%  MMM:SS   KB/s MMM:SS   KB/s
> -------------------------- ------------------------------------- -------------
> test.mynet   /data       1     N/A    2944    --     N/A    N/A    0:07  424.3
> srv1.mynet   /data       2 1651560  641856   38.9    N/A    N/A    0:35 
> 18586.6
> srv1.mynet   /etc        1     N/A      96    --     N/A    N/A    0:02   50.3
> srv1.mynet   /var        2  836610  517664   61.9    N/A    N/A    0:27 
> 18948.8
> 
> (brought to you by Amanda version 2.5.1p1)
> 
> 
> Any ideas?
> 

Any chance you have an incomplete dump image in your holdingdisk?
It may be telling you that all the complete dumps were flushed to
tape, but incomplete ones were not.  When that has happened  to
me, I've just had amflush offer me those dates to flush, but when
I selected them it would write nothing to tape and tell me the
flush failed.  At least in the older versions I have used, parts
of Amanda just check for the existence of subdirectories in your
holdingdisk, while other parts actually check to see if they
contain valid (complete) dumps.

Frank


-- 
Frank Smith                                      fsmith AT hoovers DOT com
Sr. Systems Administrator                       Voice: 512-374-4673
Hoover's Online                                   Fax: 512-374-4501