* Jean-Francois Malouin <Jean-Francois.Malouin AT bic.mni.mcgill DOT ca>
[20070620 06:52]:
> * Jean-Louis Martineau <martineau AT zmanda DOT com> [20070619 13:39]:
> > The '-d' option is ignored if you use a changer.
> >
> > What is your tapedev? `amgetconf stk_80-conf2 tapedev`
> > Is it valid?
>
> /opt/amanda/amanda2/sbin/amgetconf stk_80-conf2 tapedev
> /hw/tape/tps22d2nrnsv
>
> > What's in the amfetchdump.*.debug?
>
> No debug files for amfetchdump. That gave me the tip: I had
> seen this before on a test config. A mix of 2 different config
> apparantly as I found the amfetchdump.*.debug files in
> /tmp/amanda-spantest/server/stk_80-conf2. My mistake.
> I distcleaned and recompiled from scratch just to be sure.
> I have appended the amfetchdump debug file just in case.
> amfetcdump just stops after reaching the end of the first tape:
>
> ./icbm/inv_xfm/mni_icbm_00241_t1_nl_118_step4.xfm
> ./icbm/inv_xfm/mni_icbm_00241_t1_nl_118_step4_grid_0.mnc
> could not fsf /hw/tape/tps22d2nrnsv: No space left on device
> amfetchdump: could not fsf /hw/tape/tps22d2nrnsv: No space left on device
> /usr/freeware/bin/tar: Unexpected EOF in archive
> /usr/freeware/bin/tar: Unexpected EOF in archive
> /usr/freeware/bin/tar: Error is not recoverable: exiting now
>
> I'm must be missing something right in front of my eyes...
Following on my previous post: here's what I get
/opt/amanda/amanda2/sbin/amfetchdump -p -l stk_80-conf2 yorick
/data/ipl/ipl10
20070630 -o stk_80-conf2 | /usr/freeware/bin/tar -xvGpf -
"(null)", line 0: Must specify a value for stk_80-conf2.
7 tape(s) needed for restoration
cc
dd (null)
The following tapes are needed: stk_40-conf2-000017
stk_40-conf2-000018
stk_40-conf2-000019 stk_40-conf2-000020 stk_40-conf2-000014
stk_40-conf2-000015 stk_40-conf2-000001
Press enter when ready
ee (null)
ff /hw/tape/tps22d2nrnsv
gg /hw/tape/tps22d2nrnsv
Scanning stk_40-conf2-000017 (slot 28)
./broche/simul/spect/simset/refzubal_subject04/N2/Sim_9/Proj_weights_Sim_9_Scat.hdr
./broche/simul/spect/simset/refzubal_subject04/N2/Sim_9/Proj_weights_Sim_9_Scat.img.gz
could not fsf /hw/tape/tps22d2nrnsv: No space left on device
amfetchdump: could not fsf /hw/tape/tps22d2nrnsv: No space left on
device
/usr/freeware/bin/tar: Unexpected EOF in archive
/usr/freeware/bin/tar: Unexpected EOF in archive
/usr/freeware/bin/tar: Error is not recoverable: exiting now
I've attached the amfetchdump debug file.
jf
>
> jf
>
> >
> > Jean-Louis
> >
> > Jean-Francois Malouin wrote:
> > >with amanda-2.5.2p1 trying to pull the last full of a DLE
> > >using amfetchdump. All needed tapes are loaded in the library and I used
> > >amtape to load the first one. Same thing happens if I specify the tape
> > >device to amfetchdump '-d /hw/tape/tps22d2nrnsv' with or without '-a'.
> > >
> > ># /opt/amanda/amanda2/sbin/amfetchdump -p -a stk_80-conf2 \
> > >yorick /data/ipl/ipl10 20070616 | /usr/freeware/bin/tar -xvpf -
> > >6 tape(s) needed for restoration
> > >The following tapes are needed: stk_40-conf2-000028
> > >stk_40-conf2-000029 stk_40-conf2-000030 stk_40-conf2-000021
> > >stk_40-conf2-000032 stk_40-conf2-000022
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Looking for tape stk_40-conf2-000028...
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Looking for tape stk_40-conf2-000028...
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Looking for tape stk_40-conf2-000028...
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Looking for tape stk_40-conf2-000028...
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Looking for tape stk_40-conf2-000028...
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Looking for tape stk_40-conf2-000028...
> > >no tapedev specified
> > >amfetchdump: error reading file header: Bad file number
> > >Not an amanda tape
> > >Insert tape labeled stk_40-conf2-000028 in device (null)
> > >and press enter, ^D to finish reading tapes
> > >
> > >
> > >thanks
> > >jf
> > >
>
> --
> <° ><
> amfetchdump: debug 1 pid 24434611 ruid 0 euid 0: start at Tue Jun 19 17:57:28
> 2007
> amfetchdump: debug 1 pid 24434611 ruid 666 euid 666: rename at Tue Jun 19
> 17:57:28 2007
> append_to_tapelist(tapelist=0, label='stk_40-conf2-000028', , file=56,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000028', , file=55,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000028', , file=54,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000028', , file=53,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000028', , file=52,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000028', , file=51,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=11,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=10,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=9,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=8,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=7,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=6,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=5,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=4,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=3,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=2,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000029', , file=1,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=11,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=10,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=9,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=8,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=7,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=6,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=5,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=4,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=3,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=2,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000030', , file=1,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=10,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=9,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=8,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=7,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=6,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=5,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=4,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=3,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=2,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000021', , file=1,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=10,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=9,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=8,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=7,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=6,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=5,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=4,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=3,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=2,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000032', , file=1,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=8,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=7,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=6,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=5,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=4,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=3,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=2,
> isafile=0)
> append_to_tapelist(tapelist=100a1930, label='stk_40-conf2-000022', , file=1,
> isafile=0)
> search_tapes(prompt_out=2, prompt_in=0, use_changer=1, tapelist=100a1930,
> match_list=10025758, flags=10016550, features=0)
> num_entries(tapelist=100a1930)=6
> search_a_tape: desired_tape=100a1930 label=stk_40-conf2-000028
> tape: numfiles = 6
> tape: files[0] = 51
> tape: files[1] = 52
> tape: files[2] = 53
> tape: files[3] = 54
> tape: files[4] = 55
> tape: files[5] = 56
> current tapefile_idx = 0
> amfetchdump: time 6270.780: could not fsf /hw/tape/tps22d2nrnsv: No space
> left on device
> amfetchdump: time 6270.795: pid 24434611 finish time Tue Jun 19 19:41:59 2007
--
<° ><
amfetchdump.20070703150033.debug
Description: Text document
|