Amanda-Users

Fwd: Amanda newbie with permissions error on labeling and connecting to client

2007-05-23 18:55:02
Subject: Fwd: Amanda newbie with permissions error on labeling and connecting to client
From: "Nick Peterson" <yahooglesoft AT gmail DOT com>
To: amanda-users AT amanda DOT org
Date: Wed, 23 May 2007 15:48:25 -0700
Hello Amanda users,

I've just started installing Amanda for my first time and I seem to
have run into a snag.  I am using virtual tapes and the ammt status
check comes back saying they're online but when I try to do a amlabel
or amcheck I get the following.  I hope I didn't send this message
twice, I apologise if I did.  It also looks like I'm having some
issues connecting to the client which I can ping and did install the
client on and did put in the .amandahosts file on both client and
server.

Any help would be greatly appreciated since I don't want to have to
start again on another server.  If anyone would like to help you can
reach me on gmail talk with my email yahooglesoft AT gmail DOT com most of
the time.

Thanks,
Nick Peterson

*************OUTPUT of amcheck DailySet1*****************
Amanda Tape Server Host Check
-----------------------------
WARNING: holding disk /dumps/amanda: only 74808 KB free (2969600 KB requested)
amcheck-server: slot 18: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 19: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 20: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 21: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 22: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 23: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 24: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 25: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 1: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 2: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 3: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 4: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 5: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 6: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 7: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 8: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 9: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 10: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 11: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 12: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 13: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 14: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 15: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 16: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
amcheck-server: slot 17: tape_rdlabel: tape open:
file://space/vtapes/DailySet1/slots: Permission denied
ERROR: new tape not found in rack
      (expecting a new tape)
NOTE: skipping tape-writable test
WARNING: tapecycle (25) <= runspercycle (28).
NOTE: info dir /var/lib/amanda/DailySet1/curinfo: does not exist
NOTE: it will be created on the next run
Server check took 2.717 seconds

Amanda Backup Client Hosts Check
--------------------------------
Client check: 0 hosts checked in 0.001 seconds, 0 problems found
**************** END OUTPUT **********************


************** OUTPUT FROM amdump DailySet1 ***************
*** A TAPE ERROR OCCURRED: [new tape not found in rack].
Some dumps may have been left in the holding disk.
Run amflush to flush them to tape.
The next tape Amanda expects to use is: a new tape.

FAILURE AND STRANGE DUMP SUMMARY:
planner: ERROR Request to 192.168.178.137 timed out.
192.168.17 /home/oracle RESULTS MISSING


STATISTICS:
                        Total       Full      Daily
                      --------   --------   --------
Estimate Time (hrs:min)    0:00
Run Time (hrs:min)         0:00
Dump Time (hrs:min)        0:00       0:00       0:00
Output Size (meg)           0.0        0.0        0.0
Original Size (meg)         0.0        0.0        0.0
Avg Compressed Size (%)     --         --         --
Filesystems Dumped            0          0          0
Avg Dump Rate (k/s)         --         --         --

Tape Time (hrs:min)        0:00       0:00       0:00
Tape Size (meg)             0.0        0.0        0.0
Tape Used (%)               0.0        0.0        0.0
Filesystems Taped             0          0          0
Avg Tp Write Rate (k/s)     --         --         --


NOTES:
 planner: tapecycle (25) <= runspercycle (28)
planner: Adding new disk 192.168.178.137:/home/oracle.
 driver: WARNING: /dumps/amanda: 2969600 KB requested, but only 74680
KB available.
driver: WARNING: got empty schedule from planner


DUMP SUMMARY:
                                   DUMPER STATS            TAPER STATS
HOSTNAME     DISK        L ORIG-KB OUT-KB COMP% MMM:SS  KB/s MMM:SS  KB/s
-------------------------- --------------------------------- ------------
192.168.178. -ome/oracle   MISSING --------------------------------------

*********************END*****************************

Any ideas what I'm doing wrong?

<Prev in Thread] Current Thread [Next in Thread>