Hi Jean-Louis,

At 03:19 PM 5/4/2007, Jean-Louis Martineau wrote:

Can you post the dumper.*.debug file?

bak-05:root:> more /tmp/amanda/server/bak13/dumper.20070505143046002.debug
dumper: debug 1 pid 79452 ruid 1001 euid 0: start at Sat May  5 14:30:46 2007
dumper: debug 1 pid 79452 ruid 1001 euid 0: rename at Sat May  5 14:30:46 2007
getaddrinfo: Invalid value for ai_flags
dumper: time 129.694: pid 79452 finish time Sat May  5 14:32:56 2007

Actually there are 4 of these dumper.*.debug files all dated at almost
exactly the same time.  The above is the last one. the others all look
like below with the only change to the "time" number and pid.  The pids
are 79452, 79453, 79454 and 79455, so I assume they are the 4 dumpers
that are set by default.  Only the last one has the "ai_flags" line.

dumper: debug 1 pid 79453 ruid 1001 euid 0: start at Sat May  5 14:30:46 2007
dumper: debug 1 pid 79453 ruid 1001 euid 0: rename at Sat May  5 14:30:46 2007
dumper: time 129.699: pid 79453 finish time Sat May  5 14:32:56 2007

amanda-2.5.1p3 doesn't have the IPV6 code, it should not have theses problems.

I reverted back to the older 2.5.1p3, and did an amdump and restore.
It works!!

Thank you so much for all your help.  I will update once 2.5.2 has all
it's patches in place.
Thanks again.
 - Richard

Jean-Louis

Richard Stockton wrote:

Hi Jean-Louis,

At 02:05 PM 5/4/2007, you wrote:

Richard Stockton wrote:

Is this the same problem that Steven was having with Solaris?? Will the same

patch work for me? Or is this something different?

It's the same problem, patch attached.

Applied patch, now fails like this;

=============================================================================

FINISH planner date 20070505143046 time 9.760
FAIL dumper bak-05 da3s1d 20070505143046 0 [port open: Bad address]
FAIL driver bak-05 da2s1d 20070505143046 0 [can't switch to incremental dump]
FAIL driver bak-05 da3s1d 20070505143046 0 [dump to tape failed]

=============================================================================

Would all this continue to happen if I went back to 2.5.1p3? Or even 2.5.0?
I really need to get this working soon.
Thanks.
- Richard