|
Doing all the work, not writing it to tape
2007-04-07 14:14:52
Amanda isn't writing anything to tape, dump summary looks like:
DUMP SUMMARY:
DUMPER STATS TAPER
STATS
HOSTNAME DISK L ORIG-kB OUT-kB COMP% MMM:SS KB/s MMM:SS
KB/s
-------------------------- -------------------------------------
-------------
app01 -/md/dsk/d1 0 54350 0 0.0 0:16 1226.6 N/A
N/A
app01 -/md/dsk/d3 0 1188110 0 0.0 4:25 1965.9 N/A
N/A
app01 -/md/dsk/d4 0 424120 0 0.0 1:17 2153.4 N/A
N/A
app01 -/md/dsk/d5 0 184270 0 0.0 0:22 2399.7 N/A
N/A
app01 -/md/dsk/d6 0 17590830 0 0.0 25:54 3225.7 N/A
N/A
devl2 -/md/dsk/d0 0 2828610 0 0.0 22:00 1193.8 N/A
N/A
devl2 -/md/dsk/d5 0 481050 0 0.0 1:25 1613.1 N/A
N/A
devl2 -/md/dsk/d6 0 8791670 0 0.0 15:30 1198.7 N/A
N/A
devl2 -/md/dsk/d8 0 54808120 0 0.0 254:58 1575.1 N/A
N/A
prod2 -/md/dsk/d1 0 47870 0 0.0 0:19 912.9 N/A
N/A
prod2 -/md/dsk/d3 0 390760 0 0.0 1:45 2644.0 N/A
N/A
prod2 -/md/dsk/d4 0 786030 0 0.0 2:31 1713.9 N/A
N/A
prod2 -/md/dsk/d5 0 7563210 0 -- 5:18 23796.4 0:01
0.0
prod2 -/md/dsk/d6 0 25076100 0 0.0 67:09 2582.4 N/A
N/A
Which I find bizarre. Manually going through the tape shows only the
prod2 - d5 disk.
There aren't any errors on the email, although the NOTES part has
messages I normally wouldn't see with 2.4.3:
NOTES:
planner: Last full dump of prod2:/dev/md/dsk/d1 on tape overwritten
in 1 run.
planner: Last full dump of prod2:/dev/md/dsk/d4 on tape overwritten
in 1 run.
planner: Last full dump of prod2:/dev/md/dsk/d3 on tape overwritten
in 1 run.
planner: Last full dump of prod2:/dev/md/dsk/d6 on tape overwritten
in 1 run.
planner: Last full dump of devl2:/dev/md/dsk/d0 on tape overwritten
in 1 run.
planner: Last full dump of devl2:/dev/md/dsk/d6 on tape overwritten
in 1 run.
planner: Last full dump of devl2:/dev/md/dsk/d8 on tape overwritten
in 1 run.
planner: Last full dump of devl2:/dev/md/dsk/d5 on tape overwritten
in 1 run.
planner: Last full dump of app01:/dev/md/dsk/d1 on tape overwritten
in 1 run.
planner: Last full dump of app01:/dev/md/dsk/d3 on tape overwritten
in 1 run.
planner: Last full dump of app01:/dev/md/dsk/d4 on tape overwritten
in 1 run.
planner: Last full dump of app01:/dev/md/dsk/d5 on tape overwritten
in 1 run.
planner: Last full dump of app01:/dev/md/dsk/d6 on tape overwritten
in 1 run.
taper: tape Wk3Fri kb 32 fm 1 [OK]
big estimate: prod2 /dev/md/dsk/d1 0
est: 64k out 0k
big estimate: prod2 /dev/md/dsk/d4 0
est: 64k out 0k
big estimate: prod2 /dev/md/dsk/d3 0
est: 64k out 0k
big estimate: prod2 /dev/md/dsk/d6 0
est: 64k out 0k
big estimate: devl2 /dev/md/dsk/d0 0
est: 64k out 0k
big estimate: devl2 /dev/md/dsk/d6 0
est: 64k out 0k
big estimate: devl2 /dev/md/dsk/d8 0
est: 64k out 0k
big estimate: devl2 /dev/md/dsk/d5 0
est: 64k out 0k
big estimate: app01 /dev/md/dsk/d1 0
est: 64k out 0k
big estimate: app01 /dev/md/dsk/d3 0
est: 64k out 0k
big estimate: app01 /dev/md/dsk/d4 0
est: 64k out 0k
big estimate: app01 /dev/md/dsk/d5 0
est: 64k out 0k
big estimate: app01 /dev/md/dsk/d6 0
est: 64k out 0k
Does anyone know what's going on here?
I've upgraded from 2.4.3 to 2.5.1 on two different setups, and this one
using Solaris has had nothing but problems (Linux one had no issue).
I've very carefully gone over the installation instructions several
times and I've started from scratch. I've yet to be able to get a full
backup out of 2.5.1 on Solaris.
Appreciate any help.
Chris
|
| <Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Doing all the work, not writing it to tape,
Chris Cameron <=
|
|
|
