Pavel Pragin schrieb:
> Hello,
> 
> What happens when you run:
> mtx -f  /dev/sg2 status
> 
> Also run this and post output:
> cat /proc/scsi/scsi

Greets, Pavel ...


# mtx -f  /dev/sg2 status
  Storage Changer /dev/sg2:1 Drives, 8 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded)
      Storage Element 1:Empty
      Storage Element 2:Full
      Storage Element 3:Full
      Storage Element 4:Full
      Storage Element 5:Empty
      Storage Element 6:Empty
      Storage Element 7:Empty
      Storage Element 8:Empty

# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: SEAGATE  Model: DAT    04106-XXX Rev: 7230
  Type:   Sequential-Access                ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
  Vendor: SONY     Model: SDT-9000         Rev: 0403
  Type:   Sequential-Access                ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: DILOG    Model: SA100            Rev: E.01
  Type:   Medium Changer                   ANSI SCSI revision: 02

--

looks OK to me (this has been done while amflush is running).

Stefan